Read Panasonic CY-PAD1003W Service Manual online
1
ABOUT LEAD FREE SOLDER (PbF)
2
2
FEATUERS
2
3
REPLACEING THE FUSE
2
4
DIMENSIONS
2
5
WIRING CONNECTION
3
1 ABOUT LEAD FREE
SOLDER (PbF)
Distinction of PbF PCB:
PCBs (manufactured) using lead free solder will have a PbF
stamp on the PCB.
stamp on the PCB.
Caution :
•
•
•
•
Pb free solder has a higher melting point than standard
solder; Typically the melting point is 50 - 70°F (30 -
40°C)
solder; Typically the melting point is 50 - 70°F (30 -
40°C)
higher.
Please
use
a
soldering
iron
with
temperature control and adjust it to 700 ± 20°F (370 ±
10°C). In case of using high temperature soldering iron,
please be careful not to heat too long.
10°C). In case of using high temperature soldering iron,
please be careful not to heat too long.
•
•
•
•
Pb free solder will tend to splash when heated too high
(about 1100°F/600°C)
(about 1100°F/600°C)
•
•
•
•
This lead free solder will be used for the products after
serial No. 1,000,001.
serial No. 1,000,001.
2 FEATUERS
•
•
•
•
1100 W × 1channel maximum power output
•
•
•
•
Low-Pass Filter for subwoofer
•
•
•
•
Hight Level Speaker Input connection
•
•
•
•
Bass boost control system
•
•
•
•
Crossover Frequency Control
•
•
•
•
RCA output terminals
•
•
•
•
5.1-channel Surround System (Combination with other
Panasonic car audio products)
Panasonic car audio products)
6
REPLACEMENT PARTS LIST
4
7
EXPLODED VIEW (Unit)
9
8
WIRING DIAGRAM
10
9
SCHEMATIC DIAGRAM
15
10 BLOCK DIAGRAM
19
3 REPLACEING THE FUSE
Use fuses of the same specified rating 25 amps. Using different
substitutes or fuses with higher ratings, or connecting the unit
directly without a fuse, could cause fire or damage to the stereo
unit.
substitutes or fuses with higher ratings, or connecting the unit
directly without a fuse, could cause fire or damage to the stereo
unit.
4 DIMENSIONS
CONTENTS
Page
Page
2
CY-PAD1003W
Click on the first or last page to see other CY-PAD1003W service manuals if exist.