Read Panasonic CQ-EH1180L / CQ-EH1181L Service Manual online
5.1. Power and Volume Controls
5.1.1. Power
∙
Press PWR knob (1) to switch on the power.
∙
Perss PWR knob (1) again to switch off the power.
5.1.2. Volume
∙
Turn VOL knob (1) to the right or left to increase or
decrease the volume.
decrease the volume.
5.2. Tone Controls
5.2.1. Changing Audio Modes
∙
Press MODE knob (2) to change the audio mode as follows.
BASS
→
TREB
→
FADE
→
BAL
→
.... BASS ...
5.2.2. Bass
1. Press MODE knob (2) to select the bass mode.
2. Turn knob (2) to the right or left to increase or decrease the
low tones.
5.2.3. Treble
1. Press MODE knob (2) to select the treble mode.
2. Turn knob (2) to the right or left to increase or decrease the
high tones.
5.2.4. Fader
1. Press MODE knob (2) to select the fader mode.
2. Turn knob (2) to the right or left to shift the sound volume to
the front or rear speakers.
5.2.5. Balance
1. Press MODE knob (2) to select the balance mode.
2. Turn knob (2) to the right or left to shift the sound volume to
the right or left speakers.
5.3. Radio Controls
5.3.1. Selecting a Band
∙
Press AM button (6) to select the AM band.
∙
Press FM button (5) to select the FM band as follows.
FM1
→
FM2
→
... FM1 ...
5.3.2. Manual Tuning
∙
Turn TUNE knob (2) to the right to move to a higher
frequency by one step.
frequency by one step.
∙
Turn TUNE knob (2) to the left to move to a lower frequency
by one step.
by one step.
AM
FM
One Step
9kHz
50kHz
∙
Press and hold button (3) or (4) more than 0.5 seconds to
move to a higher or lower frequency rapidly.
move to a higher or lower frequency rapidly.
5.3.3. Seek Tuning
1. When SEEK button (3) is pressed less than 0.5 seconds,
the seek operation in the screen up direction is made.
2. The play stops when there is a station and this state is kept.
3. When SEEK button (4) is pressed less than 0.5 seconds,
the seek operation in the screen down direction is made.
4. The play stops when there is a station and this state is kept.
5.3.4. Scan Tuning
∙
Press SCAN button (10), then the frequency becomes
continuously higher by one step.
continuously higher by one step.
∙
When receiving a station, scanning operation pauses
automatically for approx. 5 seconds, and then start
scanning for next station again.
automatically for approx. 5 seconds, and then start
scanning for next station again.
5.3.5. Auto Station Memory
∙
When A.SEL button (11) press, the 6 strongest available
stations will be automaticaly set in memory on preset
buttons 1 through 6.
stations will be automaticaly set in memory on preset
buttons 1 through 6.
5.3.6. Presset Station Setting
FM1, FM2 and AM can save maximum 6 stations each.
∙
Press and hold one of the preset button 1 to 6 for more than
2 seconds to save a disired station.
2 seconds to save a disired station.
∙
Press and hold any of the button 1 to 6 for less than 2
seconds to tune in the station preset.
seconds to tune in the station preset.
M1
M2
M3
M4
M5
M6
AM
531
603
999
1404
1602
1602
FM1
87.5
87.9
90.1
98.1
106.1
108.0
FM2
87.5
87.5
87.5
87.5
87.5
87.5
(Unit : AM / kHz, FM / MHz)
5 OPERATION OF CONTROLS
5
HONDA / CQ-EH1180L / CQ-EH1181L
Click on the first or last page to see other CQ-EH1180L / CQ-EH1181L service manuals if exist.