Read Panasonic SV-MP805VGC / SV-MP805VGH / SV-MP810VGC / SV-MP810VGH Service Manual online
Memory size:
SV-MP810V: 1 GB
SV-MP805V: 512 MB
Supported sampling frequency:
MP3; 8 kHz to 48 kHz
WMA; 22.05 kHz, 32 kHz, 44.1
kHz and 48 kHz
Supported bit-rates:
MP3; 8 kbps to 320 kbps (128
kbps is recommend)
WMA; 32 kbps to 192 kbps (96
kbps is recommend)
No. of channels:
Stereo, 2 channels (MUSIC, FM
RADIO, LINE IN)
Mono, 1 channel (VOICE
RECORD)
Frequency response:
20 Hz to 20,000 Hz (+0 dB, -6 dB)
(MUSIC)
300 Hz to 4,300 Hz (VOICE
RECORD, 64 kbps)
Radio Frequency range (FM):
87.90 MHz to 107.90 MHz (200
kHz steps)
87.50 MHz to 108.00 MHz (50/100
kHz steps)
Input (LINE):
-14 dB (0.2 mV), 3.5 mm
Output:
3 mW + 3 mW (16
Ω, 3.5 mm
stereo)
2006 TAIWAN
. and
is a of .
. and
is a of .
SV-MP805VGC
SV-MP805VGH
SV-MP810VGC
SV-MP810VGH
SV-MP805VGH
SV-MP810VGC
SV-MP810VGH
Colour
(W)................... White Type
(K).................... Black Type
(K).................... Black Type
Power supply:
DC 1.5V (one alkaline battery)
Approximate play times:
36 hours (MUSIC),
7 hours (FM RADIO)
Approximate recording times:
13 hours (VOICE RECORD, 64
kbps), 7 hours (FM RADIO),12
hours (LINE IN, 128 kbps)
Dimensions (W x H x D):
Maximum: 55.8 mm x 25.7 mm x
25.2 mm
Cabinet: 55.3 mm x 25.2 mm x
25.2 mm
Mass:
34.3 g with battery
23.0 g without battery
· Specifications are subject to change without notice.
· The play time shown depends on operating conditions.
· Mass and dimensions are approximate.
· GB means one billion bytes. MB means one million bytes. Usable
capacity will be less
· This product supports the following character codes. The display
may not appear correctly with other character codes.
· The play time shown is when the bit rate is 128 kpbs (MP3), EQ
is set to NORMAL, volume is 11 and the backlight is not used.
Digital Audio Player
Specifications
TD0602002CE
1 System requirements
2
1.1.
Caution for maintainment
2
1.2.
During the maintainment, the right of the song data of the
customer as below
2
2 Safety Precaution
3
2.1.
Human body grounding
3
2.2.
Work table grounding
3
3 Service Navigation
4
3.1.
About Lead Free Solder (PbF)
4
4 Accessories
4
5 Location of Controls
5
6 Operation Checks and Component Replacement Procedures
6
6.1.
Removal of the battery cover
6
6.2.
Removal of the front cabinet
6
6.3.
Removal of the Main P.C.B.
7
6.4.
Removal of the Tuner P.C.B.
7
6.5.
Removal of the LCD Ass'y
7
6.6.
Removal of the REC Button
7
6.7.
Removal of the Hold knob
8
6.8.
Removal of the spring holder Ass'y
8
1 System requirements
1.1. Caution for maintainment
1. Please make a copy before maintainment.
2. When update the software, please re-install the firmware.
3. When replace DSP IC and Flash Memory, please re-install
2. When update the software, please re-install the firmware.
3. When replace DSP IC and Flash Memory, please re-install
the firmware and font table.
1.2. During the maintainment, the
right of the song data of the
customer as below
customer as below
1. When purchase the song from the web site, the songs has
been encoded or limited for the time for using.
The right of custermer will lose one time.
The right of custermer will lose one time.
6.9.
Removal of the battery spring and spring holder
8
7 Service Position
9
8 Service Mode
10
8.1.
Update or install the firmware(When replace DSP IC and
Flash Memory IC, please re-install the firmware and font
table.)
10
8.2.
Reset procedure
11
8.3.
Checking the software version
11
9 Troubleshooting
12
10 Troubleshooting guide
12
11 Saving data
13
12 Type Illustration of ICs, Transistors and Diodes
13
13 Block Diagram
14
14 Schematic Diagram Notes
19
15 Schematic Diagram
20
16 Printed Circuit Board Diagram
24
17 Cabinet Parts Location
26
18 Packaging
27
19 Replacement Parts List
28
2. The song that purchase from the web-site, the songs has
been encoded but no limited for the time for using or the
songe has not been encoded, the righ of customer will not
be in fuenced.
songe has not been encoded, the righ of customer will not
be in fuenced.
CONTENTS
Page
Page
2
SV-MP805VGC / SV-MP805VGH / SV-MP810VGC / SV-MP810VGH
2 Safety Precaution
2.1. Human body grounding
Use the anti-static wrist strap to discharge the static electricity
from your body.
from your body.
2.2. Work table grounding
Put a conductive material (sheet) or steel sheet on the area
where the traverse deck (optical pick-up) is placed, and ground
the sheet.
where the traverse deck (optical pick-up) is placed, and ground
the sheet.
3
SV-MP805VGC / SV-MP805VGH / SV-MP810VGC / SV-MP810VGH
· USB Cable (with Line-in)
(K1HY08YY0002) ............................................................. 1pc.
(K1HY08YY0002) ............................................................. 1pc.
· Strap Stereo earphones.................................................1pc.
(L0BAB0000205).........................................................(White)
(L0BAB0000207).........................................................(Black)
(L0BAB0000205).........................................................(White)
(L0BAB0000207).........................................................(Black)
3 Service Navigation
3.1. About Lead Free Solder (PbF)
Distinction of PbF PCB:
PCBs (manufactured) using lead free solder will have a PbF stamp on the PCB
Caution:
· Pb free solder has a higher melting point than standard solder, Typically the melting point is 30-40° C higher.
Please use a high temperature soldering iron. In case of soldering iron with temperature control, please set it to 370±10° C.
· Pb free solder will tend to splash when heated too high (about 600° C).
· When soldering or unsoldering, please completely remove all of the solder on the pins or solder area, and be sure to heat
· When soldering or unsoldering, please completely remove all of the solder on the pins or solder area, and be sure to heat
the soldering points with the Pb free solder until it melts enough.
4 Accessories
4
SV-MP805VGC / SV-MP805VGH / SV-MP810VGC / SV-MP810VGH