SL-SX450EB, SL-SX450EE, SL-SX450EG, SL-SX450GC, SL-SX450GN - Panasonic Audio Service Manual (repair manual). Page 2

Read Panasonic SL-SX450EB / SL-SX450EE / SL-SX450EG / SL-SX450GC / SL-SX450GN Service Manual online

2 optional alkaline batteries;
MP3 disc....85h
CD-DA disc....50h
2 optional rechargeable batteries;
MP3 disc....40h
CD-DA disc....23h
Recharging time:
4 to 5 hours
    
·
    
The play time may be less depending on the operating conditions.
    
·
    
Play time will be considerably reduced when playing CD-RW.
Operational temperature range:
0°C-40°C
Rechargeable temperature range:
5°C-40°C
Dimensions (WxHxD):
135x23.8x135mm
Mass:
202g (with batteries)
158g (without batteries)
 1 
Precaution of Laser Diode 
2
 2 
Accessories 
3
 3 
Handling Precautions for Traverse Deck 
4
 3.1. 
Handling the traverse deck (optical pickup) 
4
 3.2. 
Caution when replacing traverse deck 
4
 3.3. 
Grounding for electrostatic breakdown prevention 
4
 4 
Operation Checks and Component Replacement Procedures 
6
 4.1. 
Checking for the P.C.B. ass
馳 
6
 4.2. 
Replacement for the CD lid unit 
8
 4.3. 
Replacement for the LCD, button L, button R and multi
button SW unit 
9
 4.4. 
Replacement for the spring holder and open spring 
9
 4.5. 
Replacement for the traverse motor 
10
 4.6. 
Replacement for the optical pick-up 
10
 4.7. 
Replacement for the rest switch 
12
 5 
Checking the Operation Problems on the Traverse Deck
(Optical Pickup) 
13
 6 
Automatic Adjustment Results Display Function (Self-check
Function) 
14
 6.1. 
How to display automatic adjustment results 
14
Note:
Specifications are subject to change without notice.
Mss and dimensions are approximate.
Note on CD-R and CD-RW:
This unit can play CD-R and CD-RW recorded with CD-DA or MP3.
Use an audio recording disc for CD-DA and finalize* it when you
finish recording. The unit may not be able to play some discsduetothe
condition of the recording.
*A process performed after recording that enables CD-R/CD-RW
players to play audio CD-R and CD-RW.
 6.2. 
Display of automatic adjustment results (self-check
function) 
14
 7 
Display of Self-Diagnostic Function 
15
 8 
Type Illustration of IC
s, Transistors and Diodes 
15
 9 
Schematic Diagram Notes 
16
 10 Schematic Diagram 
17
 11 Printed Circuit Board and Wiring Connection Diagram 
21
 12 Block Diagram 
23
 13 Terminal Function of ICs 
25
 13.1. IC101(AN22003A-NF): Servo Amplifier 
25
 13.2. IC301(C2BBGE000792): System Control / LCD Drive  25
 13.3. IC501(MN6627935CM):Servo Processor/ Digital Signal
Processor/ Digital Filter & D/A Converter 
25
 14 Replacement Parts List 
27
 15 Cabinet Parts Location 
30
 16 Traverse Parts Location 
31
 17 Packaging 
32
 17.1. SL-SX450EB 
32
 17.2. SL-SX450EE/EG/GN 
33
 17.3. SL-SX450GC 
34
<
CONTENTS
 Page 
Page
1 Precaution of Laser Diode
CAUTION:
This unit utilizes a class 1 laser. Invisible laser radiation is emitted from the pickup lens when the unit is turned on:
 1. Do not look directly into the pickup lens.
 2. Do not use optical instruments to look at the pickup lens.
 3. Do not adjust the preset variable resistor on the optical pickup.
 4. Do not disassemble the optical pickup unit.
 5. If the optical pickup is replaced, use the manufactures specified replacement pickup only.
 6. Use of control or adjustments or performance of procedures other than those specified herin may result in hazardous
2
SL-SX450EB / SL-SX450EE / SL-SX450EG / SL-SX450GC / SL-SX450GN
Page of 35
Display

Click on the first or last page to see other SL-SX450EB / SL-SX450EE / SL-SX450EG / SL-SX450GC / SL-SX450GN service manuals if exist.