Read Panasonic SH-FX67E / SE-FX67E / SH-FX67TE Service Manual online
5.2. Service Mode Table (Wireless)
By pressing various button combinations on the player and remote control unit, you can activate the various service modes for
checking.
checking.
5.2.1. Service Mode Table 1
When a transmitter card is inserted into
main unit (PT660/760/960), FL displays
the type of card:
Type A
main unit (PT660/760/960), FL displays
the type of card:
Type A
FL Display
Key Operation
Front Key
Item
Description
Mode Name
ID Setting
Active
Transmitter
Type Display
(Display 1 - Transmitter is Type A)
(Display 1 - Transmitter is Type B)
To check the type of transmitter
inserted into the main unit. There are
two types of transmitter card. (Type A
& Type B).
Type A: FX65 & Wireless Active
Woofer
Type B: FX85 (For multiroom features)
inserted into the main unit. There are
two types of transmitter card. (Type A
& Type B).
Type A: FX65 & Wireless Active
Woofer
Type B: FX85 (For multiroom features)
Press the on main
unit or remote control to
exit the pairing mode.
unit or remote control to
exit the pairing mode.
In CD/DVD mode.
(with no disc inserted)
(with no disc inserted)
Press and hold [FAST
FORWARD] button on the
main unit.
FORWARD] button on the
main unit.
W1 W2
W1
W1 W2
W1
W1
W2
W1
Type B
Note: If transmitter card is not inserted
properly or operation abnormally,
properly or operation abnormally,
or
W2
will blink. Pairing may be
necessary.
To set the ID in the Tx & Rx. The
system goes into "Pairing Mode".
[P] will be displayed for 60 seconds to
indicate it is in "Pairing Mode".
During this condition, the "ID set"
button on the receiver unit can be
pressed to pair the Tx & Rx.
After 60 seconds, the FL display will
return to its previous display.
system goes into "Pairing Mode".
[P] will be displayed for 60 seconds to
indicate it is in "Pairing Mode".
During this condition, the "ID set"
button on the receiver unit can be
pressed to pair the Tx & Rx.
After 60 seconds, the FL display will
return to its previous display.
Note: Carry out pairing when Tx or Rx
has been changed.
has been changed.
Note : and/or will blink during
pairing. When pairing is successfully
completed,upon next power-up
and/or will not blink.
pairing. When pairing is successfully
completed,upon next power-up
and/or will not blink.
W1
W2
W1
W2
11
SH-FX67E / SE-FX67E / SH-FX67TE
Click on the first or last page to see other SH-FX67E / SE-FX67E / SH-FX67TE service manuals if exist.