Read Panasonic SC-NA30GN / SC-NA30P / SC-NA30PC Service Manual online
4
1.2.
Before Repair and Adjustment
Caution :
DO NOT SHORT-CIRCUIT DIRECTLY (with a screwdriver blade, for instance), as this may destroy solid state devices.
After repairs are completed, restore power gradually using a variac, to avoid overcurrent.
DO NOT SHORT-CIRCUIT DIRECTLY (with a screwdriver blade, for instance), as this may destroy solid state devices.
After repairs are completed, restore power gradually using a variac, to avoid overcurrent.
• Current consumption at AC 240V, at 50Hz during power on at volume minimum, (Selector : AUX mode) should be ~200 mA. (For
GN)
• Current consumption at AC 120V, at 60Hz during power on at volume minimum, (Selector : AUX mode) should be ~200 mA. (For
P/PC)
1.3.
Protection Circuitry
The protection circuitry may have operated if either of the following conditions are noticed:
• No sound is heard when the power is turned on.
• Sound stops during a performance.
• Sound stops during a performance.
The function of this circuitry is to prevent circuitry damage if, for example, the positive and negative speaker connection wires are
"shorted", or if speaker systems with an impedance less than the indicated rated impedance of the amplifier are used.
If this occurs, follow the procedure outlines below:
"shorted", or if speaker systems with an impedance less than the indicated rated impedance of the amplifier are used.
If this occurs, follow the procedure outlines below:
1. Turn off the power.
2. Determine the cause of the problem and correct it.
3. Turn on the power once again after one minute.
2. Determine the cause of the problem and correct it.
3. Turn on the power once again after one minute.
Note:
When the protection circuitry functions, the unit will not operate unless the power is first turned off and then on again.
When the protection circuitry functions, the unit will not operate unless the power is first turned off and then on again.
1.4.
Safety Part Information
Safety Parts List:
There are special components used in this equipment which are important for safety.
These parts are marked by in the Schematic Diagrams, Exploded View & Replacement Parts List. It is essential that these
critical parts should be replaced with manufacturer’s specified parts to prevent shock, fire or other hazards. Do not modify the
original design without permission of manufacturer.
critical parts should be replaced with manufacturer’s specified parts to prevent shock, fire or other hazards. Do not modify the
original design without permission of manufacturer.
Safety
Ref. No.
Part No.
Part Name & Description
Remarks
2
N4HULQZ00001
BATTERY PACK
10
RFKGCNA30EBS
FRONT CABINET ASS’Y
GN-S
10
RFKGCNA30P-S
FRONT CABINET ASS’Y
P-S
10
RFKGCNA30PCK
FRONT CABINET ASS’Y
P/PC-K
A1
K2CJ2YY00093
AC CORD
GN-S
A2
RFEA228C-AG
AC ADAPTOR
P-K, P-S, PC-K
A2
RFEA229E-AH
AC ADAPTOR
GN-S
A3
VQT5C36
O/I BOOK (En)
P-K, P-S, PC-K
A3
VQT5C37
O/I BOOK (Cf)
PC-K
A3
VQT5C51
O/I BOOK (En)
GN-S
IP1891
D4FB1R100015
RESETTABLE FUSE
IP1901
D1JBR015A007
PROTECTOR
Click on the first or last page to see other SC-NA30GN / SC-NA30P / SC-NA30PC service manuals if exist.