Read Panasonic SC-HTE80EB / SC-HTE80EE / SC-HTE80EG / SC-HTE80GN Service Manual online
13
7 Service Mode
This unit is equipped with features of service mode & doctor mode setting for checking the functions & reliability.
7.1.
Self Diagnostic Mode
Here is the procedures to enter into Self Diagnostic Mode.
Step 1 : Turn on the unit.
Step 2 : Pressing and hold [VOL -] on main unit then press [ ] follow by [ ] using the remote control.
Step 3 : The display show as follow.
Step 1 : Turn on the unit.
Step 2 : Pressing and hold [VOL -] on main unit then press [ ] follow by [ ] using the remote control.
Step 3 : The display show as follow.
To exit the Self Diagnostic Mode
Use either one of the following methods to cancel the Self Diagnostic Mode.
• Press the power button on the main unit or using the remote control.
• Unplug the AC cord.
• Unplug the AC cord.
7.1.1.
Self Diagnostic Mode Table 1
Service Mode
To enter into Self Diagnostic Mode
checking
checking
Item
FL display
Key operation
Mode name
Description
Error code information
Example:
Example:
Example:
Error History Display by pressing
button, it goes back its history list.
button, it goes back its history list.
Pressing and hold [VOL-] on main
unit then press [▼] follow by [▲]
using the remote control.
using the remote control.
Operation Time Display
information
information
Accumulation Operation Time
Display
Display
XX H or XX M (XX stand for the
total time value,
H = Hours, M = Mins.
Example: 15H = 15Hours,
45M = 45 Minutes)
total time value,
H = Hours, M = Mins.
Example: 15H = 15Hours,
45M = 45 Minutes)
The [SVC MODE] display will appear
after 3s,
after 3s,
The [SVC MODE] display will appear
after 3s,
after 3s,
In
self diagnostic mode
:
Press [INPUT] button on the remote
control.
To exit, press [
TA
] on main unit or
remote control.
In
self diagnostic mode
:
Press [MUTE] button on the remote
control.
To exit, press [
TA
] on main unit or
remote control.
Click on the first or last page to see other SC-HTE80EB / SC-HTE80EE / SC-HTE80EG / SC-HTE80GN service manuals if exist.