Read Panasonic SC-HTB10EB / SC-HTB10EE / SC-HTB10EG / SC-HTB10GN / SC-HTB10GS / SC-HTB10P / SC-HTB10PC Service Manual Supplement online
7
2.2.2.
Checking of HDMI Micro-p Firmware version
Here are the procedures for checking the HDMI micro-p firmware version no:
Step 1 : Enter into service mode. (Refer to Section 6.2 for the procedures)
Step 2 : Press [VOL-] to check the region no. (Refer to table 6-7 for information).
Step 3 : Press [VOL-] to check the HDMI micro-p firmware version no. (Refer to table 6-7 for information).
Step 1 : Enter into service mode. (Refer to Section 6.2 for the procedures)
Step 2 : Press [VOL-] to check the region no. (Refer to table 6-7 for information).
Step 3 : Press [VOL-] to check the HDMI micro-p firmware version no. (Refer to table 6-7 for information).
Table 6-7
2.2.2.1.
Generation Bit No.
The generation bit no. is used for indication of the Model Year. (Refer to table 6-8 for more information).
Table 6-8
2.2.2.2.
Model Bit No.
The model bit no. is to indicate the software for the specific model. (base on chip-select detection).
(Refer to table 6-9 for more information)
(Refer to table 6-9 for more information)
Table 6-9
2.2.2.3.
Region Bit No.
The region bit no. is to indicate the destination for model. (Refer to table 6-10 for more information).
Table 6-10
Key Operation
LED 1 (TV/BD/DVD)
LED 2 (CLEAR-
MODE)
LED 3 (SOUND-
EFFECT)
LED 4 (DVS)
LED 5 (DD/DTS)
Press [VOL-] button on main
unit
unit
Generation Bit No.
Model Bit No.
Region Bit 1
Region bit 0
O
(Green)
Press [VOL-] button on main
unit
unit
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Generation Bit
Number
Model By Year
(TV/BD/DVD) LED
X
0
2010
O
1
2011
Model Bit
Number
Model No.
CLEAR-MODE LED
X
0
HTB500
O
1
HTB10/50
Region Bit 1
Region Bit 0
HDMI Software
SOUND EFFECT
DVS
By last 2 digit
X
X
Invalid
X
O
For Japan
O
X
For Others
O
O
Invalid
Click on the first or last page to see other SC-HTB10EB / SC-HTB10EE / SC-HTB10EG / SC-HTB10GN / SC-HTB10GS / SC-HTB10P / SC-HTB10PC service manuals if exist.