Read Panasonic SC-HC4EP Service Manual online
10
4 Specifications
Q
Amplifier Section
RMS Output Power Stereo Mode
Front Ch (both ch driven)
Front Ch (both ch driven)
20 W per channel (6
Ω), 1 kHz, 10
% THD
Phone jack
Terminal
Terminal
Stereo, 3.5 mm jack
Output level (CD, 1 kHz, -20 dB)
max. 1.18 mW +1.18 mW, 32
Ω
Aux (Rear)
Sensitivity
Normal level
Sensitivity
Normal level
630 mV, 12.4 k
Ω
High level
100 mV, 12.4 k
Ω
Terminal
Stereo, 3.5 mm jack
Q
Tuner Section
Preset memory
FM 30 stations
AM 15 stations
Frequency Modulation (FM)
Frequency range
Frequency range
87.50 MHz to 108.00 MHz
(50 kHz step)
Antenna terminals
75
Ω (unbalanced)
Amplitude Modulation (AM)
Frequency range
Frequency range
522 kHz to 1629 kHz (9 kHz step)
Q
Disc Section
Disc played [8 cm or 12 cm]
(1) CD-Audio (CD-DA)
(2) CD-R/RW (CD-DA, MP3)
(3) MP3*
* MPEG-1 Layer 3, MPEG-2 Layer 3
Pick up (CD)
Wavelength
(1) CD-Audio (CD-DA)
(2) CD-R/RW (CD-DA, MP3)
(3) MP3*
* MPEG-1 Layer 3, MPEG-2 Layer 3
Pick up (CD)
Wavelength
795 nm
Laser power
CLASS 1
Audio output (Disc)
Number of channels
Number of channels
FL, FR, 2 channel
Audio performance (CD-Audio)
Frequency response
Frequency response
4 Hz to 20 kHz
S/N ratio
95 dB
Dynamic range
93 dB
Total harmonic distortion
0.005 %
Q
USB Port
Media file format support
MP3 (*.mp3)
USB device file system
FAT12/16/32
USB port power
Max 500 mA
Q
Speaker Section
Type
1 way, 1 speaker system (Bass
reflex)
Speaker unit(s)
Full range
Full range
6.5 cm Cone type
Impedance
6
Ω
Input power (IEC)
30 W (Max)
Output sound pressure
79 dB/W (1.0m)
Frequency range
55 Hz to 25 kHz (-16 dB)
90 Hz to 22 kHz (-10 dB)
90 Hz to 22 kHz (-10 dB)
Q
General
Power supply
AC 220 to 240 V, 50 Hz
Power consumption
33 W
Dimensions (W x H x D)
500 mm x 195 mm x 102.5 mm
(D = 69 mm minimum)
Mass
Approx. 3 kg
Operating temperature range
0
°C to +35°C
Operating humidity range
35% to 80 % RH (no condensa-
tion)
Power consumption in standby mode 0.2 W (approx)
Notes :
1. Specifications are subject to change without notices. Mass and
dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum ana-
lyzer.
1. Specifications are subject to change without notices. Mass and
dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum ana-
lyzer.
Click on the first or last page to see other SC-HC4EP service manuals if exist.