Read Panasonic SC-HC40EG / SC-HC40EP Service Manual online
10
4 Specifications
I Amplifier Section
RMS Output Power
Front Ch (both ch driven)
RMS Output Power
Front Ch (both ch driven)
20 W per channel (6
Ω), 1 kHz,
10 % THD
Total RMS power
40 W
Phone jack
Terminal
Terminal
Stereo, 3.5 mm jack
Aux (Rear)
Terminal
Terminal
Stereo, 3.5 mm jack
I Tuner Section
Preset memory
Preset memory
FM 30 stations
AM 15 stations
Frequency Modulation (FM)
Frequency range
Frequency range
87.50 MHz to 108.00 MHz
(50 kHz step)
Antenna terminals
75
Ω (unbalanced)
Amplitude Modulation (AM)
Frequency range
Frequency range
522 kHz to 1629 kHz
(9 kHz step)
520 kHz to 1630 kHz
(10 kHz step)
I Disc Section
Disc played [8 cm or 12 cm]
(1) CD-Audio (CD-DA)
(2) CD-R/RW (CD-DA, MP3)
(3) MP3*
* MPEG-1 Layer 3, MPEG-2 Layer 3
Pick up
Wavelength
Disc played [8 cm or 12 cm]
(1) CD-Audio (CD-DA)
(2) CD-R/RW (CD-DA, MP3)
(3) MP3*
* MPEG-1 Layer 3, MPEG-2 Layer 3
Pick up
Wavelength
795 nm
Laser power
CLASS 1
Audio output (Disc)
Number of channels
Number of channels
FL, FR, 2 channel
I Speaker Section
Type
Type
1 way, 1 speaker system
(Passive Radiator)
Speaker unit(s)
Front Speaker
Front Speaker
6.5 cm Cone type x 1 / channel
Passive Radiator
8 cm x 2 / channel
Impedance
6
Ω
I Bluetooth Section
Bluetooth system specification
Bluetooth system specification
V2.1 + EDR
Wireless equipment classifica-
tion
tion
Class 1 (2.5 mW)
Supported profiles
A2DP, AVRCP, HFP
Frequency band
2402 MHz to 2480 MHz
(Adaptive Frequency Hopping)
Driving distance
10 m Line of Sight
(iPhone 3G, at height 1 m, in MODE 1)
I USB Port Section
USB Standard
USB Standard
USB 2.0 full speed
Media file format support
MP3 (*.mp3)
USB device file system
FAT 12/16/32
USB port power
Max 500 mA
I General
Power supply
Power supply
AC 220 V to 240 V, 50 Hz
Power consumption
35 W
Dimensions (W x H x D)
500 mm x 201 mm x 102 mm
(D = 69 mm minimum)
Mass (Weight)
Approx. 3.0 kg
Operating temperature range
0
°C to +40 °C
Operating humidity range
35% to 80 % RH
(no condensation)
Power consumption in standby mode: 0.09 W (approx)
• Specifications are subject to change without notice.
• Total harmonic distortion is measured by the digital spectrum ana-
• Total harmonic distortion is measured by the digital spectrum ana-
lyzer.
Click on the first or last page to see other SC-HC40EG / SC-HC40EP service manuals if exist.