SC-HC35EG, SC-HC35EF, SC-HC35EP - Panasonic Audio Service Manual (repair manual). Page 21

Read Panasonic SC-HC35EG / SC-HC35EF / SC-HC35EP Service Manual online

21
6.3.3.
Doctor Mode Table 3
Version Display
(DEC)
Check sum
(HEX)
Item
FL Display
Key Operation
Mode Name
Description
Front Key
Cold Start
The [NO DISC] display will appear after 3s,
EEPROM not detected only firmware is display
To display result of self
adjustment for CD.
The [NO DISC] display will appear after 3s,
In Doctor Mode:
Press [
] follow by [1] & then [4] 
button on remote control. 
To cancel, press [0] button on remote 
control. It returns Doctor Mode.
To exit Doctor Mode, press 
 but-
ton on main unit or remote control.
In Doctor Mode:
Press [
] follow by [1] & then [5] 
button on remote control. 
To cancel, press [0] button on remote 
control. It returns Doctor Mode.
To exit Doctor Mode, press 
 but-
ton on main unit or remote control.
In Doctor Mode:
Press [SLEEP] button on remote
control. 
To cancel, press [0] button on remote 
control. It returns Doctor Mode.
To exit Doctor Mode, press 
 but-
ton on main unit or remote control.
To cancel, press [0] button on remote 
control. It returns Doctor Mode.
To exit Doctor Mode, press 
 but-
ton on main unit or remote control.
In Doctor Mode:
Press [
] follow by [2] & then [2] 
button on remote control. 
To cancel, press [0] button on remote 
control. It returns Doctor Mode.
To exit Doctor Mode, press 
 but-
ton on main unit or remote control.
CD Self-Adjusment 
Display
CD Combination Test
To check the open/close 
operation & inner outer disc 
access operation.
1. It fails when CD 
open/close is not completed 
by 4s.
2. The disc access fails in 
10s.
3. The traverse is out of 
focus for more than 2s.
Refer to 
6.3.7 for more 
information
To activate cold start upon 
next power up.
(Backup data are initialized)
EEPROM Checksum
To check sum of EEPROM 
for a simplifield ROM 
correction.
1. When EEPROM is not 
detected, the only micro-p’s 
version shall be displayed 
without an EEPROM’s 
check sum
Auto Power down 
Detect (APD) Test
To check for the auto power 
down operation
Condition 1 (when APD is OK)
Condition 2 (when APD is abnormal operation)
In any mode:
Press
 [    ] 
button on main unit follow by 
[4] & then [7] on remote control.
Page of 127
Display

Click on the first or last page to see other SC-HC35EG / SC-HC35EF / SC-HC35EP service manuals if exist.