SC-HC15EB, SC-HC15EG, SC-HC15EP - Panasonic Audio Service Manual (repair manual). Page 18

18

FL Display Test

To check the FL segments 
display (All segments will 
light up)

In Doctor Mode:
Press [1] button on remote control.

To cancel, press [0] button on remote 
control. It returns Doctor Mode.

To cancel, press [0] button on remote 
control. It returns Doctor Mode.

To cancel, press [0] button on remote 
control. It returns Doctor Mode.

To cancel, press [0] button on remote 
control. It returns Doctor Mode.

To exit Doctor Mode, press 

 but-

ton on main unit or remote control.

Volume Setting

 

In Doctor Mode:
Press [7] button on remote control.

In Doctor Mode:
Press [8] button on remote control.

In Doctor Mode:
Press [9] button on remote control.

Mecha Sliding Panel
Reliability 

In Doctor Mode:

Press [

] follow by [2] & then [1] 

button on remote control. 

To cancel, press [0] button on remote 
control. It returns Doctor Mode.

To exit Doctor Mode, press 

 but-

ton on main unit or remote control.

CD Traverse Test 
Mode

To check for the traverse unit 
operation. In this mode, the 
first & last track is access & 
read. (TOC). It fails when 
TOC is not completed by 10s 
or the traverse is out of 
focus. for more than 2s

Refer to 6.3.6 for more 
information

In Doctor Mode:
Press [

] follow by [1] & 

then [2] 

button on remote control. 
To cancel, press [0] button on remote 
control. It returns Doctor Mode.

To exit Doctor Mode, press 

 but-

ton on main unit or remote control.

To exit Doctor Mode, press 

 but-

ton on main unit or remote control.

To exit Doctor Mode, press 

 but-

ton on main unit or remote control.

To exit Doctor Mode, press 

 but-

ton on main unit or remote control.

To check the operation of 
sliding Panel.
Sequence as follow :
1. CD Door set to CLOSE 
position.
2. CD Door move to the left 
(CD Open direction) and 
stop at LEFT position for 1 
sec.
3. CD Door move to the 
right (CD Close direction) 
and stop at CLOSE position 
for 1 sec.
4. All the process above is 
considered as 1 cycle. Step 
(2) ~ (3) will repeat; Cycle 
Counter display increase 
every 1 cycle completed.
Refer to 6.3.5 for more 
information

To check for preset volume 
setting
Note : In tuner mode this 
function is not possible

The counter will increment by 1 until reach 

99999999