Read Panasonic SB-VKX95GA / SB-VKW95GA Service Manual online
PSG1408002CE
Speaker System
Model No.
SB-VKX95GA
SB-VKW95GA
SB-VKW95GA
Product Color : (K)... Black Type
TABLE OF CONTENTS
PAGE
PAGE
1 Specifications ----------------------------------------------------- 2
2 Disassembly and Assembly Instructions ---------------- 3
2 Disassembly and Assembly Instructions ---------------- 3
2.1. Subwoofer Speaker (SB-VKW95GAK)--------------- 4
3 Wiring Connection Diagram ---------------------------------- 6
3.1. Subwoofer Speaker (SB-VKW95GA-K)-------------- 6
4 Exploded View and Replacement Parts List ------------ 7
4.1. Front Speakers (SB-VKX95GA-K) Cabinet
Parts Location ---------------------------------------------- 7
4.2. Subwoofer Speaker (SB-VKW95GA-K)
Cabinet Parts Location ---------------------------------- 8
4.3. Packaging --------------------------------------------------- 9
4.4. Replacement Parts List ---------------------------------11
4.4. Replacement Parts List ---------------------------------11
2
1 Specifications
Front Speakers (SB-VKX95GA-K)
Speaker unit(s)
Woofer
Speaker unit(s)
Woofer
20 cm Cone type
Tweeter
6 cm Cone type
Impedance
2
Ω
Dimensions (W x H x D)
250 mm x 429 mm x 226 mm
Mass
4.4 kg
Subwoofer Speaker (SB-VKW95GA-K)
Speaker unit(s)
Super Woofer
Speaker unit(s)
Super Woofer
25 cm Cone type
Impedance
2
Ω
Dimensions (W x H x D)
360 mm x 401 mm x 271 mm
Mass
7.7 kg
Notes:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum ana-
lyzer.
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum ana-
lyzer.
3
2 Disassembly and Assembly Instructions
Caution Note:
• This section describes procedures for checking the operation and replacing the main components.
• For reassembly after operation checks or replacement, reverse the respective procedures.
• Special reassembly procedures are described only when required.
• Before carrying out the disassembly process, please ensure all the safety precautions & procedures are followed.
• During the disassembly and/or assembly process, please handle with care as there may be chassis components with sharp
• For reassembly after operation checks or replacement, reverse the respective procedures.
• Special reassembly procedures are described only when required.
• Before carrying out the disassembly process, please ensure all the safety precautions & procedures are followed.
• During the disassembly and/or assembly process, please handle with care as there may be chassis components with sharp
edges.
• During replacement of component parts, please refer to the section of “Replacement Parts List” as described in the service man-
ual.
• Select items from the following indexes when disassembly or replacement are required.
Subwoofer Speaker (SB-VKW95GA-K)
• Disassembly of Front Panel Block
• Disassembly of Woofer Speaker (SP61)
• Disassembly of Lighting Wire P.C.B. Assembly
• Disassembly of Woofer Speaker (SP61)
• Disassembly of Lighting Wire P.C.B. Assembly
4
2.1.
Subwoofer Speaker (SB-VKW95GAK)
2.1.1.
Disassembly of Front Panel Block
Step 1 : Remove 4 screws.
Step 2 : Insert flathead screwdriver into the grooves.
Step 3 : Apply light force to push open Front Panel Block as
arrow shown.
Step 4 : Insert a steel rule between the Front Panel Block and
Speaker Cabinet Assembly.
Caution : Do not exert strong force as it may damage the
Step 2 : Insert flathead screwdriver into the grooves.
Step 3 : Apply light force to push open Front Panel Block as
arrow shown.
Step 4 : Insert a steel rule between the Front Panel Block and
Speaker Cabinet Assembly.
Caution : Do not exert strong force as it may damage the
Front Panel Block.
Step 5 : Detach Front Panel Block slightly.
Caution : Do not exert strong force as it may damage the
Caution : Do not exert strong force as it may damage the
wiring within.
Step 6 : Lift up himelon.
Caution : Replace himelon if they are torn during disas-
Caution : Replace himelon if they are torn during disas-
sembling.
Step 7: Detach 2P Socket.
Step 8 : Remove Front Panel Block.
Step 8 : Remove Front Panel Block.