Read Panasonic SB-PF680GC Service Manual online
PSG0905027CE
Speaker System
Model No.
SB-PF680GC
Product Color : (K)... Black Type
TABLE OF CONTENTS
PAGE
PAGE
1 Service Navigation ----------------------------------------------- 2
1.1. System Information --------------------------------------- 2
2 Specifications ----------------------------------------------------- 3
3 Disassembly and Assembly Instructions ---------------- 4
3 Disassembly and Assembly Instructions ---------------- 4
3.1. Front Speakers (SB-PF680GC-K)--------------------- 5
3.2. Replacement of Speaker Connector Housing------ 9
3.2. Replacement of Speaker Connector Housing------ 9
4 Wiring Connection Diagram ---------------------------------11
4.1. Front Speakers (SB-PF680GC-K)-------------------- 11
5 Exploded View and Replacement Parts List -----------12
5.1. Front Speakers (SB-PF680GC-K) Cabinet
Parts Location ---------------------------------------------12
5.2. (SB-PF680GC-K) Packaging --------------------------13
5.3. Replacement Parts List ---------------------------------14
5.3. Replacement Parts List ---------------------------------14
2
1 Service Navigation
1.1.
System Information
Below is the System breakdown:
Main Model
SC-VK680EE/GA/GC/GN/GS/PU-K
Front Speakers
SB-PF680GC-K
3
2 Specifications
Front Speakers (SB-PF680GC-K)
Type
Type
2 way, 2 speaker system (Bass reflex)
Speaker unit(s)
Impedance 3
Ω
1. Tweeter
6 cm cone type
2. Woofer
16 cm cone type
Input power (IEC)
125 W (Max)
Output sound pressure
83 dB/W (1.0 m)
Frequency range
33 Hz to 28 kHz (-16 dB)
40 Hz to 26 kHz (-10 dB)
40 Hz to 26 kHz (-10 dB)
Dimensions (W x H x D)
221 mm x 401 mm x 244 mm
Mass
3.7 kg
Notes:
1. Specifications are subject to change without notice. Mass and
dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum ana-
lyzer.
1. Specifications are subject to change without notice. Mass and
dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum ana-
lyzer.
4
3 Disassembly and Assembly Instructions
“ATTENTION SERVICER”
Some chassis components may have sharp edges. Be careful when disassembling and servicing.
This section describes procedures for checking the operation and replacing the main components
For reassembly after operation checks or replacement, reverse the respective procedures
Special reassembly procedures are described only when required.
Select items from the following index when checks or replacement are required.
Refer to the Parts No. on the page of “Exploded View and Replacement Parts List” (Section 5), if necessary
Some chassis components may have sharp edges. Be careful when disassembling and servicing.
This section describes procedures for checking the operation and replacing the main components
For reassembly after operation checks or replacement, reverse the respective procedures
Special reassembly procedures are described only when required.
Select items from the following index when checks or replacement are required.
Refer to the Parts No. on the page of “Exploded View and Replacement Parts List” (Section 5), if necessary
Below is the list of disassembly sections
Replacement of Speaker Cabinet Assembly
Disassembly of Tweeter Speaker (SP1)
Disassembly of Woofer Speaker (SP2)
Replacement of Tweeter Ornament
Disassembly of Tweeter Speaker (SP1)
Disassembly of Woofer Speaker (SP2)
Replacement of Tweeter Ornament