Read Panasonic SB-MAX4000E / SB-MAX4000GS / SB-MAX4000PN / SB-MAX4000PS Service Manual online
2
1 Specifications
2 Disassembly and Assembly Instructions
Caution Note:
• This section describes procedures for checking the operation and replacing the main components.
• For reassembly after operation checks or replacement, reverse the respective procedures.
• Special reassembly procedures are described only when required.
• Before carrying out the disassembly process, please ensure all the safety precautions & procedures are followed.
• During the disassembly and/or assembly process, please handle with care as there may be chassis components with sharp
• For reassembly after operation checks or replacement, reverse the respective procedures.
• Special reassembly procedures are described only when required.
• Before carrying out the disassembly process, please ensure all the safety precautions & procedures are followed.
• During the disassembly and/or assembly process, please handle with care as there may be chassis components with sharp
edges.
• During replacement of component parts, please refer to the section of “Replacement Parts List” as described in the service man-
ual.
• Select items from the following indexes when disassembly or replacement are required.
Front Speakers
• Disassembly of Upper Front Panel Block
• Disassembly of Tweeter Speaker (SP1)
• Disassembly of Woofer Speaker (SP2)
• Disassembly of Lower Front Panel Block
• Disassembly of Subwoofer Speaker (SP3)
• Disassembly of Lighting Wire P.C.B. Assembly
• Disassembly of Tweeter Speaker (SP1)
• Disassembly of Woofer Speaker (SP2)
• Disassembly of Lower Front Panel Block
• Disassembly of Subwoofer Speaker (SP3)
• Disassembly of Lighting Wire P.C.B. Assembly
2.1.
Type of screws
Speakers
Speaker unit(s)
Tweeter
Speaker unit(s)
Tweeter
6 cm cone type
Woofer
20 cm cone type
Super Woofer
30 cm cone type
Impedance
High 3
Ω / Mid 3 Ω / Low 2 Ω
Dimensions (W x H x D)
407 mm x 709 mm x 389 mm
Mass
19 kg
Notes:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum ana-
lyzer.
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum ana-
lyzer.
Click on the first or last page to see other SB-MAX4000E / SB-MAX4000GS / SB-MAX4000PN / SB-MAX4000PS service manuals if exist.