Read Panasonic SB-AKX10PN Service Manual online
8
3.4.
Replacement of Speaker Connector Housing
3.4.1.
Disassembly
Step 1: Use a paper clip push the Speaker Wire head until it
hide inside the Speaker Connector Housing.
Step 2: Pull out the (+) and (-) speaker wire.
hide inside the Speaker Connector Housing.
Step 2: Pull out the (+) and (-) speaker wire.
3.4.2.
Assembly
Cautions: Follow the following procedure during assem-
ble.
ble.
Step 1: Use a pen knife slightly push up the speaker wire head
approximately 45
approximately 45
°.
Step 2: Insert the (+) speaker wire into the (+) hole of the
Speaker Connector Housing.
Note: Push in the speaker wire until hear the “click” sound.
Speaker Connector Housing.
Note: Push in the speaker wire until hear the “click” sound.
Step 3: Insert the (-) speaker wire into the (-) hole of the
speaker connector housing.
Note: Push in the speaker wire until hear the “click” sound.
speaker connector housing.
Note: Push in the speaker wire until hear the “click” sound.
Click on the first or last page to see other SB-AKX10PN service manuals if exist.