Read Panasonic SB-AKX10PN Service Manual online
PSG1001001CE
Speaker System
Model No.
SB-AKX10PN
Product Color : (K)... Black Type
TABLE OF CONTENTS
PAGE
PAGE
1 Service Navigation ----------------------------------------------- 2
1.1. Front Speakers (SB-AKX10PN-K) -------------------- 2
2 Specifications ----------------------------------------------------- 3
3 Disassembly and Assembly Instructions ---------------- 4
3 Disassembly and Assembly Instructions ---------------- 4
3.1. Disassembly of Front Panel Unit ---------------------- 5
3.2. Disassembly of Tweeter Speaker (SP1) ------------- 6
3.3. Disassembly of Full Range Speaker (SP2) --------- 7
3.4. Replacement of Speaker Connector Housing ------ 8
3.2. Disassembly of Tweeter Speaker (SP1) ------------- 6
3.3. Disassembly of Full Range Speaker (SP2) --------- 7
3.4. Replacement of Speaker Connector Housing ------ 8
4 Wiring Connection Diagram ---------------------------------10
5 Exploded View and Replacement Parts List ----------- 11
5 Exploded View and Replacement Parts List ----------- 11
5.1. Cabinet Parts Location --------------------------------- 11
5.2. Packaging --------------------------------------------------12
5.3. Replacement Parts List ---------------------------------13
5.2. Packaging --------------------------------------------------12
5.3. Replacement Parts List ---------------------------------13
2
1 Service Navigation
1.1.
Front Speakers (SB-AKX10PN-K)
The illustrations and disassembly procedures for the Front Speakers will be described in this manual.
3
2 Specifications
Front Speakers (SB-AKX10PN-K)
Type
Type
2 way, 2 speaker system (Bass reflex)
Speaker unit(s)
Impedance 4
Ω
Full range
16 cm Cone type
Tweeter
6 cm Cone type
Output sound pressure
85 dB/W (1.0 m)
Frequency range
34 Hz to 22 kHz (-16 dB)
41 Hz to 20 kHz (-10 dB)
41 Hz to 20 kHz (-10 dB)
Dimensions (W x H x D)
220 mm x 332 mm x 186 mm
Mass
2.6 kg
Notes:
1. Specifications are subject to change without notice. Mass and
dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum ana-
lyzer.
1. Specifications are subject to change without notice. Mass and
dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum ana-
lyzer.
4
3 Disassembly and Assembly Instructions
“ATTENTION SERVICER”
Some chassis components may have sharp edges. Be careful when disassembling and servicing.
This section describes procedures for checking the operation and replacing the main components.
For reassembly after operation checks or replacement, reverse the respective procedures.
For reassembly after operation checks or replacement, reverse the respective procedures.
Special reassembly procedures are described only when required.
Select items from the following index when checks or replacement are required.
Refer to the Parts No. on the page of “Exploded View and Replacement Parts List” (Section 5), if necessary.
Refer to the Parts No. on the page of “Exploded View and Replacement Parts List” (Section 5), if necessary.
Below is the list of disassembly sections
Disassembly of Front Panel Unit
Disassembly of Tweeter Speaker (SP1)
Disassembly of Full Range Speaker (SP2)
Disassembly of Front Panel Unit
Disassembly of Tweeter Speaker (SP1)
Disassembly of Full Range Speaker (SP2)