Read Panasonic SA-VK860EE Service Manual online
20 Basic Troubleshooting Guide
20.1. Basic Troubleshooting Guide for Traverse Unit (DVD Module P.C.B)
Problems
Checking Points
Checking Components
a) Check SDRAM address,
data bus, CLK and other
control signals waveform
data bus, CLK and other
control signals waveform
IC8051
b) Check video signals
LB8301, R8321, R8322,
LB8302, R8325, R8326
LB8302, R8325, R8326
1) Distorted picture or
abnormal sound is head
during the initialization
abnormal sound is head
during the initialization
c) Check audio DAC circuitry
* Compare the above with
OK condition HDMI
module P.C.B.
OK condition HDMI
module P.C.B.
IC8421
*Check for solder short
and/or component
missing/damaged
and/or component
missing/damaged
a) Check motor driver
circuitry (+5V)
circuitry (+5V)
IC8251 Pin 8, 21
b) Check laser drive
circuitry (Voltages &
current)
circuitry (Voltages &
current)
Q8551, Q8552, Q8561,
Q8562
Q8562
2) No TOC / Long TOC
c) Check LSI IC connection
to motor drive circuitry
to motor drive circuitry
*Compare the above with
OK condition HDMI
Module P.C.B.
OK condition HDMI
Module P.C.B.
IC8001 Pin 144 ,145
* Check for solder short
and/or component
missing/damaged
* Check for solder short
and/or component
missing/damaged
a) Check connection from
HDMI Module to Traverse
unit
HDMI Module to Traverse
unit
FP8251
3) Disc not spinning
4) Traverse not moving
5) Traverse and spindle
abnormal movement
abnormal movement
b) Check motor driver
circuitry on the voltages and
control signals
*Compare the above with
OK condition HDMI
Module P.C.B
circuitry on the voltages and
control signals
*Compare the above with
OK condition HDMI
Module P.C.B
IC8251
*Check for solder short
and/or component damaged
*Check for solder short
and/or component damaged
6) Cannot read the disc but
spindle motor is spinning
spindle motor is spinning
- Cannot read CD/DVD
a) Check laser drive
circuitry (voltages
and current)
and current)
- Check CD Laser
Drive
- Check DVD Laser
Drive
* Check voltages and LD
current and compare with
OK condition HDMI
Module P.C.B.
current and compare with
OK condition HDMI
Module P.C.B.
Q8551, Q8552, LB8531
(For DVD Laser Drive
current)
Q8561, Q8562, LB8561
(For CD Laser Drive
current)
(For DVD Laser Drive
current)
Q8561, Q8562, LB8561
(For CD Laser Drive
current)
7) Block Noise during play
a) Check SDRAM address
and data bus signal
and data bus signal
IC8051
8) Jitter out of specification
a) Check LD current
b) Check OPU
b) Check OPU
(Change to other unit and
confirmed operating
condition)
confirmed operating
condition)
OPU Unit (Traverse unit),
FPC connection
FPC connection
9) Cannot read data from USB
a) Check USB connector & FFC
b) Check LSI O/P
b) Check LSI O/P
c) Check IC supply (+5V)
FP9001
IC8001 Pin 144, 146
IC9005 Pin 2, 3
119
SA-VK860EE
Click on the first or last page to see other SA-VK860EE service manuals if exist.