Read Panasonic SA-VK650EE Service Manual online
Item
FL Display
Key Operation
Mode Name
Description
Remote Control Key
Initialization
Initialization.
User settings are cancelled and
player is initialized to factory
setting.
User settings are cancelled and
player is initialized to factory
setting.
In STOP (no disc) mode, press STOP
button on the player, and
button on the player, and
button
on the remote control unit.
DVD Module
Reset
Reset
To reset DVD Module.(In
initialisation)
When the FLASH ROM IC or DVD
Module is replaced.
initialisation)
When the FLASH ROM IC or DVD
Module is replaced.
In initialisation, press and hold STOP
button on the player followed by “Enter”
button on the remote control.
Cancelled automatically 5 seconds later.
button on the player followed by “Enter”
button on the remote control.
Cancelled automatically 5 seconds later.
DVD laser drive
current
measurement
current
measurement
DVD laser drive current
measurement.
DVD laser drive current is
measured and the result is
displayed together with the initial
value stored in the EEPROM IC.
After the measurement, DVD laser
emission is kept on. It is turned off
when POWER key is switched off.
(It is also turned off when POWER
button on the player is switched
off.)
measurement.
DVD laser drive current is
measured and the result is
displayed together with the initial
value stored in the EEPROM IC.
After the measurement, DVD laser
emission is kept on. It is turned off
when POWER key is switched off.
(It is also turned off when POWER
button on the player is switched
off.)
The value denotes the current in decimal
notation.
The above example shows the initial current
is 20mA and the measured value is 20mA.
notation.
The above example shows the initial current
is 20mA and the measured value is 20mA.
In STOP (no disc) mode, press STOP
button on the player, and FUNCTIONS
button on the remote control unit.
Cancelled automatically 5 seconds later.
Press “FL Display” button on remote
control unit for next page (FL Display) on
values of DVD drive current.
button on the player, and FUNCTIONS
button on the remote control unit.
Cancelled automatically 5 seconds later.
Press “FL Display” button on remote
control unit for next page (FL Display) on
values of DVD drive current.
Communic-
ation error display
ation error display
Displays frequency of
communication errors between
system control IC and mechanism
control IC during DVD module.
communication errors between
system control IC and mechanism
control IC during DVD module.
In STOP (no disc) mode, press STOP
button on the player, and “MENU” button
on the remote control unit.
Cancelled automatically 5 seconds later.
button on the player, and “MENU” button
on the remote control unit.
Cancelled automatically 5 seconds later.
Initial setting of
laser drive current
laser drive current
Initial setting of laser drive current.
Initial current value for each of
DVD laser and CD laser is
separately saved in the EEPROM
IC.
Initial current value for each of
DVD laser and CD laser is
separately saved in the EEPROM
IC.
The value denotes the current in decimal
notation. The above example shows the
initial current 20mA and 23mA for DVD laser
and CD laser respectively when the laser is
switched on.
notation. The above example shows the
initial current 20mA and 23mA for DVD laser
and CD laser respectively when the laser is
switched on.
In STOP (no disc) mode, press STOP
button on the player, and PAUSE button on
the remote control unit.
Cancelled automatically 5 seconds later.
Press “FL Display” button on remote
control unit for next page (FL Display) on
values of laser drive current.
button on the player, and PAUSE button on
the remote control unit.
Cancelled automatically 5 seconds later.
Press “FL Display” button on remote
control unit for next page (FL Display) on
values of laser drive current.
ECC error display ECC decode error display.
In STOP (no disc) mode, press STOP
button on the player, and TOP MENU
button on the remote control unit.
Cancelled automatically 5 seconds later.
Press “FL Display” button on remote
control unit for next page (FL Display) on
values of laser drive current.
button on the player, and TOP MENU
button on the remote control unit.
Cancelled automatically 5 seconds later.
Press “FL Display” button on remote
control unit for next page (FL Display) on
values of laser drive current.
Time 1 check
Timer 1 check.
Laser operation time.
Press “FL Display” button for next
page of FL Display (to show CD
laser time).
Laser operation time.
Press “FL Display” button for next
page of FL Display (to show CD
laser time).
Shown to the left is laser time, and to the
right laser time.
Time is shown in 4 digits of decimal notation
in a unit of 10 hours.
“0000” will follow “9999”.
right laser time.
Time is shown in 4 digits of decimal notation
in a unit of 10 hours.
“0000” will follow “9999”.
In STOP (no disc) mode, press STOP
button on the player, and “
button on the player, and “
” button on
the remote control unit.
Cancelled automatically 5 seconds later.
Press “FL Display” button on remote
control unit for next page (FL Display) on
values of laser drive current.
Cancelled automatically 5 seconds later.
Press “FL Display” button on remote
control unit for next page (FL Display) on
values of laser drive current.
Timer 1 reset
Timer 1 reset.
Laser operation timer of both DVD
laser and CD laser is reset all at
once.
Laser operation timer of both DVD
laser and CD laser is reset all at
once.
T1_0000/0000 (display1/display2)
Shown to the left is laser time and to the
right is laser time.
Time is shown in 4 digits of decimal notation
in a unit of 10 hours.
It cleared to ‘0000/0000’ upon reset.
Shown to the left is laser time and to the
right is laser time.
Time is shown in 4 digits of decimal notation
in a unit of 10 hours.
It cleared to ‘0000/0000’ upon reset.
While display Timer 1 data, press STOP
button on the player, and “
button on the player, and “
“ button on
the remote control unit.
Cancelled automatically 5 seconds later.
Cancelled automatically 5 seconds later.
Timer 2 check
Timer 2 check.
Spindle motor operation timer.
Press “FL Display” button for next
page of FL Display.
Spindle motor operation timer.
Press “FL Display” button for next
page of FL Display.
Time is shown in 5 digits of decimal notation
in a unit of 10 hours.
“0000” will follow “9999”.
in a unit of 10 hours.
“0000” will follow “9999”.
In STOP (no disc) mode, press STOP
button on the player, and “
button on the player, and “
“ button on
the remote control unit.
Cancelled automatically 5 seconds later.
Cancelled automatically 5 seconds later.
Timer 2 reset
Timer 2 reset.
Spindle motor operation timer.
Spindle motor operation timer.
Time is shown in 5 digits of decimal notation
in a unit of 10 hours.
It cleared to ‘0000’ upon reset.
in a unit of 10 hours.
It cleared to ‘0000’ upon reset.
While display Timer 2 data, press STOP
button on the player, and “
button on the player, and “
“ button on
the remote control unit.
Cancelled automatically 5 seconds later.
Cancelled automatically 5 seconds later.
26
SA-VK650EE
Click on the first or last page to see other SA-VK650EE service manuals if exist.