SA-PT850EE - Panasonic Audio Service Manual (repair manual). Page 17

VIERA Link "HDAVI Control" is a convenient function that 
offers linked operation of this unit, and a Panasonic television 
(VIERA) under "HDAVI Control". You can use this function 
by connecting the equipment with the HDMI cable. See the 
operating instructions for connected equipment for operational 
details.
This unit supports "HDAVI Control 2" function.
The TV with "HDAVI Control 2" function enables the following 
operation: 
VIERA Link Control only with TV’s remote control (for "HDAVI 
Control 2") (

 see right)

Confirm that the HDMI connection (Refer to the O/I book)  
has been made.
Confirm

 

 that the scart cable is not connected.

Set "VIERA Link" to "On"
(

 

p

OI age 28, "HDMI" tab).

To complete and activate the connection correctly, turn on 
all VIERA Link HDAVI Control compatible equipment and set 
the television to the corresponding HDMI input mode for the 
home theater system.

Whenever the connection or settings are changed, reconfi rm 
the points above.

You can turn on the home theater system and television, and 
start playing the disc in the play position with a single press of 
a button.

Playback may not be immediately displayed on the television. If 
you miss the beginning portion of playback, press [

 ] or [

]  

to go back to where playback started.

HDMI input mode for the home theater system, the home 
theater system will automatically switch to "DVD/CD" if it is 
in "AUX  " or "D-IN " mode.

When you start disc play, the television will automatically switch 
to the HDMI input mode for the home theater system.

You can select whether audio is output from the home theater 
system or the television speakers by using the television menu 
settings. For details, refer to the operating instructions of your 
television.

Home Cinema
Theater speakers are active.

To cancel muting, you can also use the home theater 

remote 

control ( Refer to the O/I book).
If you turn off the home theater system, television 

speakers 

will be automatically activated.

TV
Television speakers are active.

  

To toggle which input source the main unit will automatically 
switch to, press [ SETUP] while the main unit is in "AUX " or 
"D-IN" mode.

The default setting is "AUX".

When the television is turned off, the home theater system 
goes into standby mode automatically.

When the television is turned on, the home theater system 
does not turn on automatically. (Power on link is not 
available.)

 

 

For "AUX" or "D-IN" mode, power off link can be set to work 
with one or the other. To toggle the mode that this function 
works with, press [ SETUP] while the main unit is in "AUX" 
or "D-IN" mode.

The default setting is "AUX".

Only the home theater system turns off when you press [ ] for 
shutting it down. Other connected equipment compatible with 
VIERA Link HDAVI Control stay on. 

You can control the disc menus of the home theater system 
with the TV s remote control when using the "DVD/CD" or 
"USB" source. When operating the TV s remote control, refer to 
the below illustration for operation buttons.

 

1. Select the theater operation menu by using

the television menu settings.
(For details, refer to the operating 
instructions of your television.)

2. Select the desired item.

:  Shows a disc 

top menu or

progam list. 

:  Shows a disc menu 

or play list.

:  The basic operations 

for discs are 
available.

Note  

Depending on the menu, some button operations cannot be 
performed from the TV’s remote control.
"Control Panel" can be selected directly by using a button on the 
TV s remote control (e.g. [OPTION]).

The television speakers are automatically muted.
You can control the volume setting using the volume or 
mute button on the TV’s remote control. (The volume level is 
displayed on the main unit’s FL display.)

Theater speakers will be automatically activated (

 see below).

This function also works if you press [ , PLAY] on the home 
theater remote control during home theater standby mode.

When you switch the television input to:

TV tuner mode, the home theater system will automatically 
switch to "AUX  " or "D-IN ".

 

 

When the home theater system is in standby mode, 
changing the television speakers to theater speakers in the 
television menu will automatically turn the home theater 
system on and select "AUX  " or "D-IN " as the source.

 

 

 

To toggle the mode that this function works with, press 
[ SETUP] while the main unit is in "AUX " or "D-IN" mode.

The default setting is "AUX ".

 

 

Audio output is 2-channel audio.

When switching between the theater and television speakers, 
the TV screen may be blank for several seconds.

This function works only when "DVD/CD", "USB", "AUX  " 
or "D-IN " is selected as the source on the home theater 
system.

 

The volume of the home theater system is set to "0".

This function works only when "DVD/CD", "USB", "AUX  " 
or "D-IN  " is selected as the source on the home theater 
system.

 

 

 

To toggle the mode that this function works with, press 
[ SETUP] while the main unit is in "AUX" or "D-IN" mode.

 

The default setting is "AUX".

 

The home theater system will  

  automatically switch to "DVD/CD" if it   

is in "AUX  " or "D-IN ".

17