Read Panasonic SA-PM54E / SA-PM54EG Service Manual online
Item
FL Display
Key Operation
Mode Name
Description
Front Key
Volume Setting To Forced Volume
Setting.
· BASS TREBLE set to
0dB.
· H.BASS is off.
1.
2.
3.
In doctor mode:
1.
1.
Press [7] button on remote control.
2.
Press [8] button on remote control.
3.
Press [9] button on remote control.
To exit, press [ENTER] button on remote
control or
control or
button on main unit or
remote control.
TPS
To check FF TPS for
deck.
(For more information,
refer to section 8.1.6)
deck.
(For more information,
refer to section 8.1.6)
In doctor mode:
1.
1.
Press [
] button on remote
control.
To exit, press [ENTER] button on remote
control or
control or
button on main unit or
remote control.
CD Tray and
Tape Door Open
To check CD Tray and
Tape Door Open.
Tape Door Open.
· BASS TREBLE set to
0dB.
· H.BASS is off.
· CD tray and Cassette
· CD tray and Cassette
cover shall open
simultaneously.
simultaneously.
In doctor mode:
1.
1.
Press [1] button on remote control.
To exit, press [ENTER] button on remote
control or
control or
button on main unit or
remote control.
Changer
Operation
To check the CD
Changer Operation.
(For more information,
refer to section 8.1.7)
1. Tray 1 load, tray 2
open then close.
2. Tray 1 load, tray 3
open then close.
3. Tray 1 load, tray 4
open then close.
4. Tray 1 load, tray 5
open then close.
5. CD check mode and
then close.
6. Tray 1 load.
7. After the above
process, [CHNGR_OK]
shall be displayed. If
there is no problems.
Error codes will display if
errors occurs.
Changer Operation.
(For more information,
refer to section 8.1.7)
1. Tray 1 load, tray 2
open then close.
2. Tray 1 load, tray 3
open then close.
3. Tray 1 load, tray 4
open then close.
4. Tray 1 load, tray 5
open then close.
5. CD check mode and
then close.
6. Tray 1 load.
7. After the above
process, [CHNGR_OK]
shall be displayed. If
there is no problems.
Error codes will display if
errors occurs.
In doctor mode:
1.
1.
Press [DISC] button on remote control.
To exit, press [ENTER] button on remote
control or
control or
button on main unit or
remote control.
8.1.1. Cassette Mechanism Self-Diagnostic Mode
Below is information on the checking of cassette deck mechanism
No.
Operation Procedures
Micon operation & processing
1
C-mecha Abnormal Detection shall be
executed for DECK 1 only.
executed for DECK 1 only.
Check that all DECK mechanism leaf SW is in OFF state.
2
[
] key is pressed, after loading in a
NORMAL type cassette with the recording tab
on the left side removed.
on the left side removed.
FF shall be executed for 2 sec, after which STOP.
Check the following.
{ F.REC INH SW } is OFF
{ R.REC INH SW } is ON
{ HALF SW } is ON
Reel pulse toggles between H & L.
Check the following.
{ F.REC INH SW } is OFF
{ R.REC INH SW } is ON
{ HALF SW } is ON
Reel pulse toggles between H & L.
3
[
] key is pressed, after loading a
NORMAL, CrO2, METAL type cassette with
the recording tab on the right side removed.
the recording tab on the right side removed.
REW shall be executed for 2 sec, after which STOP.
Check the following.
{ F.REC INH SW } is ON
{ R.REC INH SW } is OFF
{ HALF SW } is ON
Reel pulse toggles between H & L.
Check the following.
{ F.REC INH SW } is ON
{ R.REC INH SW } is OFF
{ HALF SW } is ON
Reel pulse toggles between H & L.
14
SA-PM54E / SA-PM54EG
Click on the first or last page to see other SA-PM54E / SA-PM54EG service manuals if exist.