Read Panasonic SA-NC9EE / SF-NC9EE Service Manual Simplified online
Step 4 Remove 8 screws.
Step 5 Detach cable at connector (CN2810) on Main P.C.B.
Step 6 Detach cable at connector (CN5101) on Transformer
P.C.B.
Step 7 Remove rear block.
· Disassembly of Sub Heat Sink P.C.B
Step 6 Detach cable at connector (CN5101) on Transformer
P.C.B.
Step 7 Remove rear block.
· Disassembly of Sub Heat Sink P.C.B
Step 8 Remove 2 screws.
Step 1 If a cassette tape cannot be removed from the deck (the
tape is caught by the capstan or pinch roller during playback or
recording), rotate the flywheel F in the direction of the arrow to
remove it.
tape is caught by the capstan or pinch roller during playback or
recording), rotate the flywheel F in the direction of the arrow to
remove it.
Step 9 Remove Sub Heatsink P.C.B.
· Replacement
· Replacement
of
voltage
regulator
transistors
(Q5111/Q5901/Q5902).
Step 10 Remove 1 screw .
Step 11 Remove transistor clip.
Step 12 Desolder & remove the component.
Repeat Step 10 to Step 12 for replacement of Q5901 & Q5902.
Repeat Step 10 to Step 12 for replacement of Q5901 & Q5902.
5.3. Rectification for tape jam problem
· Follow the (Step 1) - (Step 5) of Item 10.4
7
SA-NC9EE
Click on the first or last page to see other SA-NC9EE / SF-NC9EE service manuals if exist.