Read Panasonic SA-MAX4000E / SA-MAX4000GM / SA-MAX4000GS Service Manual Simplified online
6
3 Specifications
Q
Amplifier section
RMS output power stereo mode
High Ch
350 W per channel (3
Ω
), 1 kHz, 30% THD
Mid Ch
350 W per channel (3
Ω
), 1 kHz, 30% THD
Low Ch
500 W per channel (2
Ω
), 100 Hz, 30% THD
Total RMS stereo mode power
2400 W
Q
Disc section
Disc played (8 cm or 12 cm)
CD, CD-R/RW (CD-DA, MP3*)
*MPEG-1 Layer 3, MPEG-2 Layer 3
Pick up
Pick up
Wavelength
790 nm(CD)
Q
Buetooth
®
section
Version
Bluetooth
®
2.1 + EDR
Class
Class 2
Supported profiles
A2DP, AVRCP, SPP, OPP, FTP
Operating frequency
2.4 GHz band FH-SS
Operation distance
10 m line of sight
Q
Tuner section
Frequency modulation (FM)
Preset memory
30 stations
Frequency range
87.50 MHz to 108.00 MHz (50 kHz step)
Antenna terminals
75
Ω
(unbalanced)
Amplitude modulation (AM)
Preset memory
15 stations
Frequency range
522 kHz to 1629 kHz (9 kHz step)
520 kHz to 1630 kHz (10 kHz step)
Q
Internal memory section
Memory
Memory size
2 GB
Media file format support
MP3 (*.mp3)
Memory recording
Bit rate
128 kbps
Memory recording speed
1x, 3x max (CD only)
Recording file format
MP3 (*.mp3)
Q
Terminal section
USB port
USB standard
USB 2.0 full speed
Media file format support
MP3 (*.mp3)
USB device file system
FAT12, FAT16, FAT32
USB recording
Bit rate
128 kbps
USB recording speed
1x, 3x (CD only)
Recording file format
MP3 (*.mp3)
AUX IN 1
Audio input
Pin jack
AUX IN 2
Terminal
Stereo, 3.5 mm jack
Microphone
Terminal
Mono, 6.3 mm jack
Q
General
Power supply
AC 220 V to 240 V, 50 Hz
(for E)
AC 220 V to 240 V, 50/60 Hz
(for GM/GS)
Power consumption
155 W
Dimensions (W x H x D)
492 mm x 221 mm x 421 mm
Mass
5.8 kg
Operating temperature range
0
°
C to +40
°
C
Operating humidity range
35% to 80% RH
(no condensation)
Power consumption in standby
mode (approximate)
mode (approximate)
0.4 W
Power consumption in standby
mode (approximate)
(With “BLUETOOTH STANDBY”
set to “ON”)
mode (approximate)
(With “BLUETOOTH STANDBY”
set to “ON”)
0.5 W
Note:
1. Specifications are subject to change without notice.
Mass and dimension are approximate.
2. Total harmonic distortion is measured by the digital spec-
trum analyzer.
Q
System: SC-MAX4000E
Main Unit: SA-MAX4000E
Speaker System: SB-MAX4000E
Q
System: SC-MAX4000GM
Main Unit: SA-MAX4000GM
Speaker System: SB-MAX4000GS
Q
System: SC-MAX4000GS
Main Unit: SA-MAX4000GS
Speaker System: SB-MAX4000GS
Click on the first or last page to see other SA-MAX4000E / SA-MAX4000GM / SA-MAX4000GS service manuals if exist.