SA-BX500EB, SA-BX500EE, SA-BX500EG - Panasonic Audio Service Manual (repair manual). Page 7

Read Panasonic SA-BX500EB / SA-BX500EE / SA-BX500EG Service Manual online

1.5. Caution for AC Cord
(For the United Kingdom and Republic of Ireland)
( EB  area code model only)
For your safety, please read the following text 
carefully.
This appliance is supplied with a moulded three pin 
mains plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug. 
Should the fuse need to be replaced please ensure 
that the replacement fuse has a rating of 5-ampere 
and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
or the BSI mark
 
on the body of the fuse.
If the plug contains a removable fuse cover you 
must ensure that it is refitted when the fuse is
replaced.
If you lose the fuse cover the plug must not be used 
until a replacement cover is obtained.
A replacement fuse cover can be purchased from 
your local dealer.
CAUTION!
IF THE FITTED MOULDED PLUG IS 
UNSUITABLE FOR THE SOCKET OUTLET IN 
YOUR HOME THEN THE FUSE SHOULD BE 
REMOVED AND THE PLUG CUT OFF AND 
DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE 
ELECTRICAL SHOCK IF THE CUT OFF PLUG IS 
INSERTED INTO ANY 13-AMPERE SOCKET.
If a new plug is to be fitted please obser ve the 
wiring code as stated below.
If in any doubt please consult a qualified electrician.
WARNING: DO NOT CONNECT EITHER WIRE 
TO THE EARTH TERMINAL WHICH IS MARKED 
WITH THE LETTER E, BY THE EARTH SYMBOL 
 OR COLOURED GREEN OR GREEN/
YELLOW.
THIS PLUG IS NOT WATERPROOF KEEP DR Y.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type 
of AC mains plug (figures A and B). Confirm the AC 
mains plug fitted and f ollow the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach the fuse cover.
IMPORTANT
The wires in this mains lead are coloured in 
accordance with the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the 
coloured markings identifying the terminals in your 
plug, proceed as follows:
The wire which is coloured Blue must be connected 
to the terminal which is marked with the letter N or 
coloured Black or Blue.
The wire which is coloured Brown must be 
connected to the terminal which is marked with the 
letter L or coloured Brown or Red.
Figure A
Figure B
Figure A
Figure B
Fuse
(5 ampere)
Fuse
(5 ampere)
Fuse cover
7
SA-BX500EB / SA-BX500EE / SA-BX500EG
Page of 127
Display

Click on the first or last page to see other SA-BX500EB / SA-BX500EE / SA-BX500EG service manuals if exist.