Read Panasonic SA-BT200EB / SA-BT200EG / SA-BT200P / SA-BT200PC / SA-BT203P / SA-BT205EB / SA-BT205EG / SA-BT205EP / SA-BT205EE / SA-BT205GA / SA-BT205GS / SA-BT207GN / SA-BT300P / SA-BT300PC / SA-BT205GT / SA-BT205PU / SA-BT300PX Service Manual Supplement online
3
1 Notes
This supplement includes additional and revised contents to the original service manual for below sections:-
1. Correction of Service Mode Table
1.1.
Special Mode Setting
1.1.1.
Service Mode Table 1
With reference to original service manual (section 7.2.1) on page 27 for model no. SA-BT200EB/EG-K, SA-BT200P/PC-K, SA-
BT205EB/EG/EP-K, SA-BT207GN-K & SA-BT300P/PC-K.
With reference to original service manual (section 7.2.1) on page 26 for model no. SA-BT203P-K.
With reference to original service manual (section 7.2.1) on page 28 for model no. SA-BT205GA/GS-K.
With reference to original service manual (section 7.2.1) on page 26 for model no. SA-BT300PX-K.
BT205EB/EG/EP-K, SA-BT207GN-K & SA-BT300P/PC-K.
With reference to original service manual (section 7.2.1) on page 26 for model no. SA-BT203P-K.
With reference to original service manual (section 7.2.1) on page 28 for model no. SA-BT205GA/GS-K.
With reference to original service manual (section 7.2.1) on page 26 for model no. SA-BT300PX-K.
Item
FL display
Key operation
Mode name
Description
Front Key
Initialize Mode
*A
1) Unit power-up
2) FL shows "Hello" then "goodbye"
3) Unit power-down
4) Unplug & plug AC Cord
1) Unit power-up
2) FL shows "Hello" then "goodbye"
3) Unit power-down
4) Unplug & plug AC Cord
ll the main unit’s parameters are initialized.
Press [SKIP FWD] & [OPEN/
CLOSE] follow by [POWER]
button on main unit simultan-
eously for five seconds when
power is off.
CLOSE] follow by [POWER]
button on main unit simultan-
eously for five seconds when
power is off.
Rating password
The audiovisual level setting password is ini-
tialized to
tialized to
Level 8
.
Service Mode
Setting every kind of modes for servicing.
*Details are described in
*Details are described in
7.3.1. Service Mode
at a glance
.
When the power is off, press [SKIP
FWD]
FWD]
[PLAY]
by
keys on remote control
[SETUP]
on main unit follow
BD-ROM history cleaning < Persistent Storage> of BD-ROM standard is
cleaned.
Screen display: [The player’s history data has
been cleared] is displayed for five seconds.
Screen display: [The player’s history data has
been cleared] is displayed for five seconds.
Same display as before execution.
When disc is not in tray. press
[STOP] and [POWER] keys simulta-
neously for 5 seconds.
When power on press [STOP] on
main unit & [POWER] on remote
control.
[STOP] and [POWER] keys simulta-
neously for 5 seconds.
When power on press [STOP] on
main unit & [POWER] on remote
control.
When power is off, press [SKIP
FWD] & [OPEN/CLOSE] keys
simultaneously for 5 seconds
or more.
FWD] & [OPEN/CLOSE] keys
simultaneously for 5 seconds
or more.
Forced disc eject
Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
mode.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted.
The tray will open and unit will shift to P-off
mode.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted.
The display before execution
leaves.
leaves.
Forced power-off
When the power button is not effective while
power is ON, turn off the power forcibly.
power is ON, turn off the power forcibly.
Display in P-off mode.
Press [POWER] key over than 10
seconds.
seconds.
Aging
Perform sequence of modes as * Aging
Description shown below continually.
Description shown below continually.
Display
following
the
mode.
When the power is ON, press
5
seconds and less than 10 seconds.
NOTE1:
If Unit has not turned into Aging
mode by operations shown above,
execute TEST MODE once and re-
execute operation shown above.
(*All the main unit s parameters
include tuner are initialized by TEST
mode.)
mode by operations shown above,
execute TEST MODE once and re-
execute operation shown above.
(*All the main unit s parameters
include tuner are initialized by TEST
mode.)
NOTE2:
If the unit has hung-up because of
pressing keys for over 10 seconds,
once turn off the power, and re-exe-
cute this command.
*When releasing Aging mode, press
[POWER] key over 10 seconds.
pressing keys for over 10 seconds,
once turn off the power, and re-exe-
cute this command.
*When releasing Aging mode, press
[POWER] key over 10 seconds.
-----------
INIT
INIT
SERV
******
******
******
&
simultaneously for 5 seconds.
[SKIP FW], [PLAY] & [OPEN/
CLOSE] simultaneously for over
CLOSE] simultaneously for over
Press [SKIP REV] on remote
control, follow by [PLAY] on main
unit simultaneously for five
seconds when power-on.
control, follow by [PLAY] on main
unit simultaneously for five
seconds when power-on.
Click on the first or last page to see other SA-BT200EB / SA-BT200EG / SA-BT200P / SA-BT200PC / SA-BT203P / SA-BT205EB / SA-BT205EG / SA-BT205EP / SA-BT205EE / SA-BT205GA / SA-BT205GS / SA-BT207GN / SA-BT300P / SA-BT300PC / SA-BT205GT / SA-BT205PU / SA-BT300PX service manuals if exist.