Read Panasonic SA-BFT800EE / SA-BFT800EEK Service Manual online
120
11.4. Checking & repairing of D-Amp P.C.B. (Side A)
Step 1 Remove Back Cabinet Assembly.
Step 2 Remove SMPS Shield Unit.
Step 3 Remove Fan from SMPS Shield Unit.
Step 4 Remove Joint Shield.
Step 5 Remove D-Amp P.C.B..
Step 6 Place D-Amp P.C.B. onto SMPS Chassis.
Step 7 Place main unit onto 2 insulated block (e.g.: 2 boxes).
Step 8 Place a mirror under main unit (To show contents of FL Display from mirror).
Step 9 Connect 10P Cable to the connector (CN5400) on D-Amp P.C.B..
Step 10 Connect 17P FFC to the connector (CN5402) on D-Amp P.C.B..
Step 11 Connect Fan to the connector (CN5401) on D-Amp P.C.B..
Step 12 Proceed to check and repair Side A of D-Amp P.C.B..
Caution: Insulated Material is required to insulate D-Amp P.C.B. from other parts.
Step 2 Remove SMPS Shield Unit.
Step 3 Remove Fan from SMPS Shield Unit.
Step 4 Remove Joint Shield.
Step 5 Remove D-Amp P.C.B..
Step 6 Place D-Amp P.C.B. onto SMPS Chassis.
Step 7 Place main unit onto 2 insulated block (e.g.: 2 boxes).
Step 8 Place a mirror under main unit (To show contents of FL Display from mirror).
Step 9 Connect 10P Cable to the connector (CN5400) on D-Amp P.C.B..
Step 10 Connect 17P FFC to the connector (CN5402) on D-Amp P.C.B..
Step 11 Connect Fan to the connector (CN5401) on D-Amp P.C.B..
Step 12 Proceed to check and repair Side A of D-Amp P.C.B..
Caution: Insulated Material is required to insulate D-Amp P.C.B. from other parts.
Click on the first or last page to see other SA-BFT800EE / SA-BFT800EEK service manuals if exist.