Read Panasonic RR-XR800E / RR-XR800PC Service Manual online
13
Step 6 : Press [FOLDER], to playback track 2 using speaker output.
Step 7 : Insert the headphone, to stop it will not respond to any key pressed.
Step 8 : Insert the microphone, to record 128kbps by EXT MIC at MIC sensitivity HIGH.
Step 9 : Press [LIST], to playback track 3 using headphone output.
Step 10 : Remove battery to exit from this mode or proceed to next section 6.2.5 to check the area setting of the unit.
6.2.5.
Area Setting Checking Mode
Purpose :
• To check the Area Code of the unit.
Procedures :
Step 1 : Repeat steps 1 to 9 from section 6.2.4. “Audio Output Checking Mode”
Step 2 : Press [ERASE], to set area, press [VOL -] or [VOL +].
Step 1 : Repeat steps 1 to 9 from section 6.2.4. “Audio Output Checking Mode”
Step 2 : Press [ERASE], to set area, press [VOL -] or [VOL +].
Step 3 : Press [
] (PLAY/ENTER), to set.
Step 4 : Remove battery to exit from this mode.
Click on the first or last page to see other RR-XR800E / RR-XR800PC service manuals if exist.