Read Panasonic RR-US590E Service Manual online
12
2. Press and hold [
] for 10 seconds and enter the number of bad blocks counting mode.
6.1.7.
Check Sum in the Firmware Function
Purpose: To confirm the check sum in the Firmware stored area in the NAND flash memory in order to judge whether the data of the
Firmware area is normal or not.
Procedures:
Firmware area is normal or not.
Procedures:
1. Enter into Test Mode, check all segments of LCD light up.
2. Set the Recording position switch to “WIDE”.
3. Press and hold [
2. Set the Recording position switch to “WIDE”.
3. Press and hold [
] for 10 seconds and enter this mode.
Click on the first or last page to see other RR-US590E service manuals if exist.