Read Panasonic RP-DJ1215E Service Manual Simplified online
Order No.AD1308008AE
J1
Stereo Headphones
Model No.
RP-DJ1215E
Colour
(S)............Silver Type
(S)............Silver Type
Specification
TABLE OF CONTENTS
Please file and use this manual together with the service manual for Model No.RP-DJ1200E,
Order No. AD9605128C8.
Order No. AD9605128C8.
Type:
Dynamic Closed-type
Driver units:
41 mm (1-5/ 8in.) diameter
Impedance:
32ɹ / 1 kHz
Sensitivity:
106dB / mW
Rated power:
200 mW
Power handling capacity:
1,500 mW( * IEC)
Frequency response:
5 - 30,000Hz
Cord:
Approx. 3m (9.8ft.) long
Plug:
Stereo mini-plug [3.5mm (1/ 8in.) diameter], straight-type, gold-plated
Mass:
Approx. 230g (8.11oz.)(without cord)
Approx. 330g (11.64oz.)(net)
Accessories:
Carrying pouch (RFX1415)...1pc.
6.3mm (1/ 4in.) diameter large stereo plug adaptor (gold plated)(RFX1414)...1pc.
* IEC:International Electrotechnical Commission
Specifications are subject to change without notice.
Specifications are subject to change without notice.
2
PAGE
PAGE
1 Service Navigation------------------------------------------------3
1.1. General Description About Lead Free Solder
(PbF) ----------------------------------------------------------3
1.2. Sold the Lead Wire ----------------------------------------3
2 Exploded View and Replacement Parts List -------------4
2.1. Frame and Casing Section ------------------------------4
2.2. Packing Parts and Accessories Section -------------5
2.3. Replacement Parts List -----------------------------------6
2.2. Packing Parts and Accessories Section -------------5
2.3. Replacement Parts List -----------------------------------6
3
1 Service Navigation
1.1.
General Description About Lead Free Solder (PbF)
The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this
equipment in considering the globally environmental conservation.
The normal solder is the alloy of tin (Sn) and lead (Pb). On the other hand, the lead free solder is the alloy mainly consists of tin
(Sn), silver (Ag) and Copper (Cu), and the melting point of the lead free solder is higher approx.30
equipment in considering the globally environmental conservation.
The normal solder is the alloy of tin (Sn) and lead (Pb). On the other hand, the lead free solder is the alloy mainly consists of tin
(Sn), silver (Ag) and Copper (Cu), and the melting point of the lead free solder is higher approx.30
°C (86°F) more than that of the
normal solder.
Distinction of P.C.B. Lead Free Solder being used
Distinction of P.C.B. Lead Free Solder being used
Service caution for repair work using Lead Free Solder (PbF)
• The lead free solder has to be used when repairing the equipment for which the lead free solder is used.
(Definition: The letter of “PbF” is printed on the P.C.B. using the lead free solder.)
• To put lead free solder, it should be well molten and mixed with the original lead free solder.
• Remove the remaining lead free solder on the P.C.B. cleanly for soldering of the new IC.
• Since the melting point of the lead free solder is higher than that of the normal lead solder, it takes the longer time to melt the
• Remove the remaining lead free solder on the P.C.B. cleanly for soldering of the new IC.
• Since the melting point of the lead free solder is higher than that of the normal lead solder, it takes the longer time to melt the
lead free solder.
• Use the soldering iron (more than 70W) equipped with the temperature control after setting the temperature at 350±30
°C
(662±86
°F).
Recommended Lead Free Solder (Service Parts Route.)
• The following 3 types of lead free solder are available through the service parts route.
RFKZ03D01KS-----------(0.3mm 100g Reel)
RFKZ06D01KS-----------(0.6mm 100g Reel)
RFKZ10D01KS-----------(1.0mm 100g Reel)
RFKZ06D01KS-----------(0.6mm 100g Reel)
RFKZ10D01KS-----------(1.0mm 100g Reel)
Note
* Ingredient: tin (Sn) 96.5%, silver (Ag) 3.0%, Copper (Cu) 0.5%, Cobalt (Co) / Germanium (Ge) 0.1 to 0.3%
1.2.
Sold the Lead Wire
4
2 Exploded View and Replacement Parts List
2.1.
Frame and Casing Section