Read Panasonic RF-800UGA / RF-800UGS Service Manual online
14
6.5.
Disassembly of Battery P.C.B.
• Refer to “Disassembly of Rear Cabinet Block”.
Step 1 : Release the catch.
Step 2 : Release the 2P Cable from the slot.
Caution : During assembling, ensure that the 2P cable is
properly inserted into the slot.
Step 3 : Slightly press the Battery P.C.B. by using screwdriver.
Caution : During assembling, ensure that the 2P cable is
properly inserted into the slot.
Step 3 : Slightly press the Battery P.C.B. by using screwdriver.
Step 4 : Remove the Battery P.C.B..
Caution : During assembling, inserted the 2P Cable into
the opening of Rear Cabinet Block as diagram shown.
Ensure the Battery P.C.B. is seated properly into the slots.
Caution : During assembling, inserted the 2P Cable into
the opening of Rear Cabinet Block as diagram shown.
Ensure the Battery P.C.B. is seated properly into the slots.
Click on the first or last page to see other RF-800UGA / RF-800UGS service manuals if exist.