CS-XE9EKE, CU-XE9EKE, CS-XE12EKE, CU-XE12EKE - Panasonic Air Conditioner Service Manual (repair manual). Page 39

39

1. It can be used to operate the air conditioner in limited function if remote control is misplaced or malfunction.

• Auto operation will start when Auto OFF/ON Button is pressed and released within 5 seconds.
• Within 5 minutes of each operation, if the Auto OFF/ON Button is pressed again for more than 5 seconds the air conditioner

will switch to another operation after “Beep” sound.

2. The Auto OFF/ON Button may be used together with remote control to set / change the advanced setting of air conditioner

operation.

• Press and hold AUTO OFF/ON Button for more than 5 seconds, the air conditioner always operate force cooling operation.
• Press and hold AUTO OFF/ON Button until 2 Beep sounds are heard, the forced heating operation is at standby condition.
• Press and hold AUTO OFF/ON Button until 3 Beep sounds are heard, the various setting mode is at standby condition.
• Press and hold AUTO OFF/ON Button until 4 Beep sounds are heard, the individual correspondence mode is at standby con-

dition.

• During standby condition, when the indoor unit receives “AC RESET” signal (Beep sound is heard) from remote control, the

corresponding mode will be activated.