Read Panasonic CS-E7JKEW / CU-E7JKE / CS-E9JKEW / CU-E9JKE / CS-E12JKEW / CU-E12JKE / CS-E15JKEW / CU-E15JKE / CU-E15JKE-1 / CS-E7JKEW-3 / CU-E7JKE-3 / CS-E9JKEW-3 / CU-E9JKE-3 / CS-E12JKEW-3 / CU-E12JKE-3 / CS-XE7JKEW / CS-XE9JKEW / CS-XE12JKEW / CS-XE15JKEW Service Manual online
CS-E7JKEW CU-E7JKE
CS-E9JKEW CU-E9JKE
CS-E12JKEW CU-E12JKE
CS-E15JKEW CU-E15JKE
CS-E15JKEW CU-E15JKE-1
CS-E7JKEW-3 CU-E7JKE-3
CS-E9JKEW-3 CU-E9JKE-3
CS-E12JKEW-3 CU-E12JKE-3
CS-XE7JKEW CU-E7JKE
CS-XE9JKEW CU-E9JKE
CS-XE12JKEW CU-E12JKE
CS-XE15JKEW CU-E15JKE
CS-XE7JKEW CU-E7JKE-3
CS-XE9JKEW CU-E9JKE-3
CS-XE12JKEW CU-E12JKE-3
CS-XE15JKEW CU-E15JKE-1
4E27CBPG, Order No. RAC0209005C2, Model No. CU-3E18EBE, Order No. RAC0602011C2 and Model No. CU-2E15GBE,
Order No. MAC0704001A2.
4 Location of Controls and Components ------------------ 27
4.2. Outdoor Unit ----------------------------------------------- 27
4.3. Remote Control ------------------------------------------- 27
5.2. Outdoor Unit ----------------------------------------------- 29
6.3. CU-E15JKE------------------------------------------------ 32
7.3. CU-E15JKE------------------------------------------------ 35
8.2. Outdoor Unit ----------------------------------------------- 37
9.2. Outdoor Unit ----------------------------------------------- 42
10.2. Outdoor Unit ----------------------------------------------- 49
11.2. Indoor Unit ------------------------------------------------- 53
11.3. Outdoor Unit ----------------------------------------------- 56
12.2. Indoor Fan Motor Operation --------------------------- 60
12.3. Outdoor Fan Motor Operation------------------------- 61
12.4. Airflow Direction ------------------------------------------ 61
12.5. Quiet operation (Cooling Mode/Cooling area
12.7. Powerful Mode Operation ------------------------------ 63
12.8. Timer Control---------------------------------------------- 63
12.9. Auto Restart Control------------------------------------- 63
12.13. Mild Dry Cooling Operation ---------------------------- 68
13.2. Soft Dry Operation --------------------------------------- 69
13.3. Heating Operation---------------------------------------- 69
13.4. Automatic Operation------------------------------------- 69
13.5. Indoor Fan Motor Operation --------------------------- 70
13.6. Powerful Mode Operation ------------------------------ 70
13.7. Auto restart control--------------------------------------- 70
13.8. Indication Panel------------------------------------------- 70
13.9. Mild Dry Cooling Operation ---------------------------- 70
14.2. Protection Control For Cooling & Soft Dry
15.2. Remote Control Button --------------------------------- 76
16.2. Breakdown Self Diagnosis Function ---------------- 79
16.3. Error Codes Table --------------------------------------- 80
16.4. Self-diagnosis Method---------------------------------- 82
18.2. Sensible Capacity Chart ------------------------------ 150
19.2. Outdoor Unit --------------------------------------------- 158
• Electrical work must be installed or serviced by a licensed electrician. Be sure to use the correct rating of the power plug and
the seriousness is classified by the following indications.
leakage, electrical shock or fire.
fire or electrical shock.
done, the set will drop and cause injury.
outlet must be used. If electrical circuit capacity is not enough or defect found in electrical work, it will cause electrical shock or fire.
Otherwise, it may cause electrical shock and fire in case equipment breakdown or insulation breakdown.
Thickness of copper pipes used with R410A must be more than 0.8mm. Never use copper pipes thinner than 0.8mm.
It is desirable that the amount of residual oil is less than 40 mg/10m.
the unit, it may cause fire.
furniture.
break and cause refrigerant gas leakage.
high temperature solder iron. In case of the soldering iron with temperature control, please set it to 700 ± 20°F (370 ± 10°C). Pb free solder
will tend to splash when heated too high (about 1100°F / 600°C).
methods.
Power supply point shall be the place where there is ease for access for the power disconnection in case of emergency. In some countries,
permanent connection of this room air conditioner to the power supply is prohibited.
i. Power supply connection to the receptacle using a power plug. Use an approved 15/16A (3/4~1.75HP), 16A (2.0HP), 20A (2.5HP) or
Take care of the liquid refrigerant, it may cause frostbite.