Read Panasonic CS-C18JKD / CU-C18JKD / CS-C24JKD / CU-C24JKD Service Manual online
42
14.2. Remote Control Button
14.2.1.
SET BUTTON
• To check current remote control transmission code and store the transmission code to EEPROM.
- Press “SET” button for more than 10 seconds.
- Press “TIMER SET” button until a “beep” sound is heard as confirmation of transmission code change.
- Press “TIMER SET” button until a “beep” sound is heard as confirmation of transmission code change.
• To change the air quality sensor sensitivity:
- Press and release with pointer.
- Press the Timer Decrement button to select sensitivity:
- Press the Timer Decrement button to select sensitivity:
1. Low Sensitivity
2. Standard (Default)
3. Hi Sensitivity
2. Standard (Default)
3. Hi Sensitivity
- Confirm setting by pressing Timer Set button, a “Beep” sound will be heard. LCD returns to original display after 2 seconds.
- LCD returns to original display if remote control does not operate for 30 seconds.
- LCD returns to original display if remote control does not operate for 30 seconds.
14.2.2.
CLOCK BUTTON
• To change the remote control’s time format.
- Press for more than 5 seconds.
14.2.3.
RESET (RC)
• To clear and restore the remote control setting to factory default.
- Press once to clear the memory.
14.2.4.
TIMER
• To change indoor unit indicator’s LED intensity.
- Press continuously for 5 seconds.
14.2.5.
TIMER
• To change remote control display from Degree Celsius to Degree Fahrenheit.
- Press continuously for 10 seconds.
Click on the first or last page to see other CS-C18JKD / CU-C18JKD / CS-C24JKD / CU-C24JKD service manuals if exist.