Read Panasonic CS-A28JKD / CU-A28JKD Service Manual online
48
14.2. Remote Control Button
14.2.1.
SET BUTTON
• To check current remote control transmission code
- Press for more than 10 seconds
- Press “TIMER SET” button until a “beep” sound is heard as confirmation of transmission code change.
- Press “TIMER SET” button until a “beep” sound is heard as confirmation of transmission code change.
• To change the air quality sensor sensitivity
- Press and release with pointer.
- Press the Timer Decrement button to select sensitivity:
- Press the Timer Decrement button to select sensitivity:
1. Low Sensitivity
2. Standard (Default)
3. Hi Sensitivity
2. Standard (Default)
3. Hi Sensitivity
- Confirm setting by pressing Timer Set button, a “Beep” sound will be heard. LCD returns to original display after 2 seconds.
- LCD returns to original display if remote control does not operate for 30 seconds
- LCD returns to original display if remote control does not operate for 30 seconds
14.2.2.
CLOCK BUTTON
• To change the remote control’s time format.
- Press for more than 5 seconds
14.2.3.
RESET
• To clear and restore the remote control setting to factory default
- Press once to clear the memory.
14.2.4.
TIMER
• To change indoor unit indicator’s LED intensity
- Press continuously for 5 seconds.
14.2.5.
TIMER
• To change remote control display from Degree Celsius (
qC) to Degree Fahrenheit (qF).
- Press continuously for 10 seconds.
Click on the first or last page to see other CS-A28JKD / CU-A28JKD service manuals if exist.