WT1201CW - LG Washing Machine Service Manual (repair manual). Page 6

Read LG WT1201CW Service Manual online

Water tap
Rubber Seal
Water Supply Hose
1
Be sure there is a gasket in both ends of the hose.
Push the water supply hose up so that the rubber packing
within the hose can adhere completely to the tap.
2
Connect the water supply hose to the tap.
Run a couple of gallons of water through the hoses into the drain or a
bucket to flush any particulate or contaminate.
3
Check water leakage.
After connecting the hose, open the tap to check for
any water leakage.
Connecting Water Supply Hose to the Machine
• Be sure there is a gasket in the end of the hose.
•  Connect the hose to the appropriate inlet vale 
(hot or cold) of the washing machine and tighten if 
firmly.
•  Turn on the water and check for leacks.
•  Always install new hoses with a new washing 
machine Do not re-use old hoses.
•  Relplace the hoses every five years.
Screw Type
2-2. CONNECTING WATER SUPPLY HOSE
6
Before connecting the water supply hose to the water tap, check the hose type and then choose the
correct instruction here below. 
Page of 55
Display

Click on the first or last page to see other WT1201CW service manuals if exist.