Read LG WT-W7111TH Service Manual online
31
12.HOW TO DIAGNOSE AND REPAIR BY SYMPTOMS
12-1. Washer is not energized.
Where, what & how to check?
Result of Check
Possible Cause
How to repair & settle
Household Power supply
1. Check whether connection between
the plug and the electrical is poor
2. Measure voltage of the electrical.
Wiring of the Washer
1. Measure resistance between both
ends of the power supply cord with
both the plug pins short-circuited.
both the plug pins short-circuited.
2. Check whether every connector in
the bundle of connectors has a
good connection.
good connection.
3. Check resistance of every wire to
find out a open wire.
Electrical component
1. Check resistance with power relay
switch turned on
2. Check the secondary voltage of the
transfomer.
3. Check whether the fuse is open.
Controller
If there are no defects in the above,
it should be defect of the controller.
Poor
Around rating
0V
Less than 1
Male & female
connectors
separated
connectors
separated
Less than 0.5
More than 1.0
10~14V
0V
0V
Open
Over 120%
voltage than
rating check
voltage than
rating check
Defect of the
electrical
electrical
No defect
Defect of household
power supply
power supply
No defect
Open circuit of the
power supply cord
power supply cord
Poor connection.
Wire is opened.
No defect
Poor contact
No defect
Coil is open
Defect of the fuse
Change the electrical.
Call for power supply
company
company
Change the power
supply cord.
supply cord.
Remove the cause to
give strain and
reconnect them.
give strain and
reconnect them.
Change the lead wire.
Change the Auto Off
Switch
Switch
Change the
transfomerformer.
Change the fuse.(time
delay type) CAUTION
Check the fuse rating
AC220~240V:250V 8A
(AC110~127V : 125V 12A)
delay type) CAUTION
Check the fuse rating
AC220~240V:250V 8A
(AC110~127V : 125V 12A)
Change the controller
if all the electrical parts
have no defects.
if all the electrical parts
have no defects.
Click on the first or last page to see other WT-W7111TH service manuals if exist.