Read LG WT-R857 Service Manual online
4
2. INSTALLATION INSTRUCTIONS
2-1. HOW TO ADJUST LEVEL
Lower
Raise
How to use the adjusting plates
Use the adjusting plates to level the washer
when the adjustable legs cannot cover the gap.
when the adjustable legs cannot cover the gap.
Checking level
Open the lid, and check if the
washer is correctly leveled by
looking down from the top.
washer is correctly leveled by
looking down from the top.
3
Set rear legs
Remove the level and tilt the washer
forward (pivot on front legs) about 4 to
6 inches (10 to 15cm) and gently
lower the rear legs back onto the floor.
This action will set rear leg
adjustments to correspond to front
settings
forward (pivot on front legs) about 4 to
6 inches (10 to 15cm) and gently
lower the rear legs back onto the floor.
This action will set rear leg
adjustments to correspond to front
settings
Installation area
Install the washer on flat and firm
surface.
If the washer is installed on an
unsuitable floor, it could make
considerable noise and vibration.
surface.
If the washer is installed on an
unsuitable floor, it could make
considerable noise and vibration.
1
2
Improper installation of the washer may cause noise and malfunctioning.
1. The ventilating openings in the base area must not be obstructed be carpeting
when the washing machine is installed on a carpeted floor.
2. Install the washing machine on a level and firm surface, any tilt should be less
than 1° .
3. Wooden floors may need reinforcing to prevent the normal vibration which
occurs with an unbalanced load.
4. If the washer is installed on an inclined floor, it could make considerable
noises and vibration and could cause a malfunction.
Turn the adjustable legs to set the washer
horizontal(2EA).
horizontal(2EA).
Click on the first or last page to see other WT-R857 service manuals if exist.