WT-R807 - LG Washing Machine Service Manual (repair manual). Page 16

Use to turn the power on or off. 
Push again and power goes on or off 
The power goes off automatically about 10 seconds
after the wash is finished.

These buttons can be selectable for every
program.

Soak:It gives additional 30 min Soak.
(Except for Wool, Delicates, Rinse/Spin,
Spin Only) 

Spin Hold: It gives gentle spin instead of
normal spin (Except for Wool, Delicates,
Wash Only) 

Use to set a delayed finishing time.
The time increases when the button is pushed.
The following settings are indicated as the button is
pushed 3  

4   

5   

... 11  

12  

14   

16

...18  

2 HOUR.

To cancel delay time, turn the power switch off.

This button allows
you to store a
customized wash
cycle for future
use . 

This button allows you to select the
strength of the wash action. 
Power option selections light up in
sequence as follows Medium 
Heavy

Light 

Medium as the

button is pushed. 
This can be selected for any
program, but when washing Heavy,
it starts with Heavy. 
Adjustment can be made while
washing. 

* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by 8minutes at

maximum and decreased by 4 minutes at maximum.

* If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically adds rinsing,

and the remaining time may be increased.

* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to the

washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.

• It only operates in Normal Program.
• During being detected by the sensor, the LED flashes green, orange 

and red in turn. And, after detecting, the LED lights a specific color according to the
detecting condition as follows:  

If the current washing condition (Detergent quantity, Water Temperature, water quality,
etc.) is determined as better than the standard one, it optimizes the algorithm to save the
energy by decreasing washing time/strength,  and the LED automatically turns to red.  
If the current washing condition is determined as worse than the standard one, it
optimizes the algorithm by increasing washing time/strength, and the LED
automatically turns to orange.
If the current washing condition is determined as equal to the standard one, the
algorithm has no change and the LED turns to green.