Read LG WT-R1375TH Service Manual online
19
5
6
3
6
7
4
6
7
4
6
7
4
6
7
4
Close the lid
Finish
Caution & Note
• The pulsator rotates for
8 seconds to detect the
laundry load.
laundry load.
• Then the WATER
LEVEL and the amount
of Detergent to be
used will be shown and
water will be supplied.
of Detergent to be
used will be shown and
water will be supplied.
• Water will be
supplied for 2
minutes after the
start of the wash to
supplement the
water the laundry
has absorbed.
minutes after the
start of the wash to
supplement the
water the laundry
has absorbed.
• When the wash
program ends, the
buzzer will ring for
10 seconds before
the Power goes
off automatically.
buzzer will ring for
10 seconds before
the Power goes
off automatically.
• If water is already in the tub, or putting
wet laundry into the tub before starting will
increase the WATER LEVEL.
increase the WATER LEVEL.
• With lightweight bulky loads, WATER
LEVEL can be set low.
• When setting the WATER LEVEL manually,
do not set to Medium to prevent damage to
laundry.
laundry.
• Washing with HOT water may damage the
laundry (Water is set to cold automatically).
Ensure that the load is under 2kg.
Ensure that the load is under 2kg.
• In order to avoid damage to laundry, the
spin cycle may appear slow. This also
avoids wrinkles and clothing may still
contain some water. This is normal.
avoids wrinkles and clothing may still
contain some water. This is normal.
• When static pressure of water is more
than 2kg/cm
2
, the QUICK WASH course
will be within 19min.
Click on the first or last page to see other WT-R1375TH service manuals if exist.