WT-R1235TP - LG Washing Machine Service Manual (repair manual). Page 17

* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by

8minutes at maximum and decreased by 4 minutes at maximum.

* If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically

adds rinsing, and the remaining time may be increased.

* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to

the washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.

* The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a

liquid one or a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased.

• Time left - During operation, the remaining time

is indicated.

(RESERVATION) - When DELAY START
(RESERVATION)  program is selected, it
indicates the finishing time. (RES.=DELAY)

• Alarm indication -When an error occurs, an error

message appears to indicate the abnormality. 
For example,           indicates that the lid is open.

• Use to set a delayed finishing time.
• The time increases when the button is

pushed.

• The following settings are indicated as

the button is pushed 3  4 

5 

...11  12  14      16 

...46 

48  3 HOUR.

• To cancel delay time, turn the power

switch off.

• Use to adjust the WATER LEVEL as required. The

appropriate amount of Detergent is shown next to the
WATER LEVEL in the WATER-DETERGENT diagram

• WATER LEVEL is automatically selected for FUZZY

(normal) program.
The following settings are indicated as the button is pushed  
LARGE         LARGE . EX-LARGE        EX-LARGE
SMALL        SMALL MEDIUM        MEDIUM
MEDIUM LARGE        LARGE

• This button allows you to select the

strength of the water current.

• Power option selections light up in

sequence as follows  NORMAL 
STRONG 

GENTLE 

NORMAL

as the button is pushed. This can be
selected for any program, but when
washing jeans, it starts with Strong. 

• Adjustment can be made while

washing. 

• Use when wash, rinse, spin time

need to be adjusted.

• The time increases when the
button is pressed . 
• If adjustments are needed during

the wash, press the [start/pause]
button before making any changes. 

• When the button is  pressed during

washing, the remaining time is
displayed. 

• Use to select Water

Temperature. 
Pressing the button allows
you to select  COLD
WARM (HOT&COLD)
HOT      COLD
respectively.  
Default setting is COLD.