WT-R10686 - LG Washing Machine Service Manual (repair manual). Page 9

Read LG WT-R10686 Service Manual online

9
2-3. CONNECT THE DRAIN HOSE
35"~47" (0.9~1.2m
)
35"~47" (0.9~1.2m
)
WARNING:
•  Connect the drain hose to the 
outlet of the drain pump located at 
the rear of the washing machine. 
Attach the clip to the drain hose. 
•   And then push it toward the body of 
the washing machine as indicated 
by the arrow.
•  Check that the drain hose is hung 
up over the edge of the laundry tub.
• Do not use an extension hose.
NOTE : 
•  
The drain hose should always be properly secured to the drain or standpipe. Failure to secure 
the drain hose properly can result in flooding and property damage.
             • The end of the drain hose should be placed 39" (99 cm) above the floor.
             • The drain must be installed in accordance with any applicable local codes and regulations.
             • Make sure that the water lines are not stretched, pinched, crushed, or kinked.
             •  Do not insert the drain hose more than 12” (30 cm) into the drain pipe to avoid siphoning and  
odor build-up.
Cable Tie
Cable Tie
35"~47" (0.9~1.2m
)
35"~47" (0.9~1.2m
)
WARNING:
•  The washer should never be installed or stored in a location subject to freezing temperatures. If the 
washer was exposed to freezing temperatures prior to installation, allow it to stand at room 
temperature for several hours before use. Damage to the water lines and internal mechanisms of 
the washer can result.
•  Water supply pressure must be between 7.2 psi and 87 psi (50~600kPa) If the water supply 
pressure is more than 87 psi, a pressure reducing valve must be installed. If you have uncontrolled 
water temperature and pressure you should fit a temperature and pressure relief valve to ensure 
that water temperature and water pressure remain within the safe limits. Consult a plumber or 
electrician if you are unable to adjust water temperature and or pressure. Failure to do so can result 
in damage to the machine.
•  Plug the power cord of washer into a properly grounded outlet. Failure to do this can result in shock 
or serious injury.
Page of 63
Display

Click on the first or last page to see other WT-R10686 service manuals if exist.