Read LG WT-D182HVG Service Manual online
17
DELAY START (RESERVATION) BUTTON
• Use to set a delayed finishing time.
• The time increases when the button
• The time increases when the button
is pushed.
• The following settings are indicated
as the button is pushed 3 4 5
... 11 12 14 16 ...46 48
3 HOUR.
• To cancel delay time, turn the power
switch off.
(refer to page 24)
PROGRAM BUTTON
• Use for selecting wash program.
• This button allows you to select 12
• This button allows you to select 12
different programs for different kinds of
laundry and dirtiness.
• program selections light up in sequence as
COTTON/NORMAL STAIN CARE
SANITARY SMART CLEANING
ECO COTTON QUICK WASH
BULKY/BEDDING SPORTS WEAR
TOWELS WOOL TUB CLEAN
FAVORITE Select the desired program
by pressing the button.
START/PAUSE BUTTON
• Use to start or pause the
washing process.
• Repeats start and pause by
pushing the button.
WASHING CONDITION INDICATOR (OPTION)
• It only operates in FUZZY Program..
• During being detected by the sensor,,the LED flashes green,orange
• During being detected by the sensor,,the LED flashes green,orange
and red in turn.And,after detecting,the LED lights a specific color according to the detecting condition as
follows:
If the current washing condition (Detergent quantity,Water Temperature,water quality,etc.)is determined as
better than the standard one,it optimizes the algorithm to save the energy by decreasing washing
time/strength,
and the LED automatically turns to red.
If the current washing condition is determined as worse than the standard one,it optimizes the algorithm by
increasing washing time/strength,and the LED automatically turns to orange.
If the current washing condition is determined as equal to the standard one,the algorithm has no change and the
LED turns to green.
SMARTDIAGNOSIS
FUNCTION DISPLAY
FUNCTION DISPLAY
• It marks the place to put the
phone to receive signal when a
problem occurs.
problem occurs.
POWER (AUTO OFF)
BUTTON
BUTTON
• Use to turn the power on or off.
• Push again and power goes on or off
• The power goes off automatically
• Push again and power goes on or off
• The power goes off automatically
*Because the detecting ability of the sensor may be decreased by using it for a long time,periodically use
TUB CLEAN course to clean the tub.(refer to page 21)
*Even if the water level is changed by the user in FUZZY(Normal)Program,
the sensor will still work.The sensor algorithm may differ according to models.
*The control panel may differ according to different models.
Click on the first or last page to see other WT-D182HVG service manuals if exist.