WP-90050 - LG Washing Machine Service Manual (repair manual). Page 11

Fig. 33

Fig. 34

Fig. 35

Fig. 36

Fig. 37

4-6. Washing Tub Assembly
       replacement

After removing the panel assembly, the safety cover
assembly, the spin dryer basket assembly, the spin
dryer cover, the washing cover, the Q-spring, the
nozzle case, the door switch and the back cover,
proceed as follows:

1. Disconnect the drain hose.

2. Remove the V-belt from the pulsator pulley (Fig. 33).

3. Remove the screws fastening the washing tub

assembly and pull it out (Fig. 34).

To assemble the washing tub assembly, reverse
the disassembly procedure.

Apply adhesive on hose joint to prevent
water leaks.

NOTE

4-7. Gear Case Assembly
       replacement

Loosen the pulsator fixing screw and pull up the
pulsator (Fig. 35).

1.

After removing the back cover and opening the
washing cover, proceed as follows:

Remove the V-belt

2.

Lay the washing machine on its front side on a
blanket or some cardboard.

3.

Unscrew and remove the screws fastening the base
and remove the base assembly (Fig. 37).

4.

-11-