Read LG WP-890RT Service Manual online
11
After removing the panel assembly, the safety cover
assembly, the spin dryer basket assembly, the spin dryer
cover, the washing cover, the Q-spring, top cover assembly,
v-belt the door switch and the back cover, proceed as follows:
1. Lay the front side on a blanket or cardborad.
After removing the back cover and opening the washing
cover, proceed as follows:
1. Take out the pulsator cap with "-" type driver.
2. Loosen the pulsator fixing screw and pull up the
pulsator(Fig. 36).
2. Disconnect the drain hose or the drain hose-D
(Pump model).
3. Loosen the pulsator fixing and pull up the pulsator
4. Remove waterfall both side by pull up (Fig. 34.A)
4. Remove waterfall both side by pull up (Fig. 34.A)
5. Remove the screws washing Tub(cabinet) (Fig. 35).
3. Unscrew and remove the screws fastening the
base and remove the base from the cabinet.
4. Lay the washing machine on its front side on a
blanket or some cardboard and remove the base
(Fig. 38).
To assemble the washing Tup(cabinet), reverse the
disassembly procedure.
NOTE
Apply adhesive on hose joint to prevent
water leaks.
Fig. 34
Fig. 35
Fig. 36
Fig. 37
Fig. 38
Fig. 34.A
4-7. Wshing Tub(Cabinet)
Replacement
4-8. Gear Case Assembly,
Replacement
Click on the first or last page to see other WP-890RT service manuals if exist.