Read LG WP-881RT Service Manual online
-11-
4-5. Washing Tub Assembly
replacement
After removing the panel assembly, the safety cover
assembly, the spin dryer basket assembly, the spin
dryer cover, the washing cover, the Q-spring, the
nozzle case, the door switch and the back cover,
proceed as follows:
1. Disconnect the drain hose(non pump model) or the
drain
hose-D (Pump model).
2. Remove the V-belt from the pulsator pulley(Fig. 32).
4-6. Gear Case Assembly
Replacement
1. Open the washing cover and loosen the pulsator
fixing screw and pull up and remove the pulsator.
(Fig. 34).
3. Unscrew and remove the screw fasting the nozzle
case assembly.
4. Remove the nozzle case assembly from the tub.
(Fig. 33)
5. Remove the screws fastening the washing tub
assembly and pull it out. (Fig. 33)
2. Remove the V-belt(Fig. 35).
3. Lay the washing machine on its front side on a
blanket or some cardboard.
4. Unscrew and remove the screws fastening the base
and remove the base assembly. (Fig. 36)
To assemble the washing tub assembly, reverse
the disassembly procedure.
NOTE
Apply adhesive on hose joint to prevent
water leaks.
Fig. 32
Fig. 33
Fig. 34
Fig. 35
Fig. 36
Click on the first or last page to see other WP-881RT service manuals if exist.