Read LG WP-750NP Service Manual online
8
4-2. Spin Dryer Cover
replacement
After removing the back cover, the panel assembly,
proceed as follows:
proceed as follows:
1. Open the spin dryer cover and separate brake wire
strap from the brake wire assembly (Fig. 16).
4-3. Spin Dryer Basket
Assembly replacement
After removing the back cover, proceed as follows:
1. Take hold of the front of the safety cover-1.
2. Insert screw drive (“-”Type) into the hook position.
3. Pull the safety cover-1 upward (fig. 19).
2. Remove the Q-spring (Fig. 17).
3.Remove the screw fastening the door switch and
remove the door switch (Fig. 17).
4. Remove the spin dryer cover by widening between the
hinge hole of the top cover and the hinge of the spin
dryer cover and pulling up the spin dryer cover (Fig. 18).
dryer cover and pulling up the spin dryer cover (Fig. 18).
5. Loosen the fixing bolt of the coupling assembly
fastening the spin shaft (Fig. 20).
6. Pull out completely the spin basket assembly (Fig. 21).
To assemble the spin dryer cover assembly, reverse
the disassembly procedure.
the disassembly procedure.
To assemble the spin dryer basket assembly, reverse
the disassembly procedure.
the disassembly procedure.
Fig. 18
Fig. 17
Fig. 16
Fig. 19
Fig. 20
Fig. 21
Click on the first or last page to see other WP-750NP service manuals if exist.