Read LG WP-703DT Service Manual online
-13-
4. Tighten the bolt of the coupling assembly while
adjusting it to the cutter split made in the spin shaft.
(Fig.
(Fig.
4
2)
2. Untighten the plunger valve cover by rotating in the
direction of the arrow. (Fig.44)
3. Remove the plunger valve spring, the plunger valve
rod and the plunger valve bellows.
To assemble the plunger valve assembly, reverse the
disassembly procedure.
disassembly procedure.
If water leakage occurs at the spin tub after
assembling the bellows assembly and the bellows
supporter, it is wrong. It could cause
an electrical
shock or a fire, therefore they
should be securely
assembled again.
NOTE
NOTE
• Damage to the plunger valve cover may
cause water leakage.
• When replacing the plunger valve assembly,
take care not to cause water leakage.
4-8. Plunger
Valve
Assembly
Replacement
After removing the back cover and setting the knob
for the drain selector to “WASH•RINSE”, proceed
for the drain selector to “WASH•RINSE”, proceed
as follows:
1. Disconnect the plunger valve strap from the rod.
1. Disconnect the plunger valve strap from the rod.
(Fig.43)
Fig.42
Fig.43
Fig.44
Fig.45
NOTE
Click on the first or last page to see other WP-703DT service manuals if exist.