WP-1500RST - LG Washing Machine Service Manual (repair manual). Page 18

Read LG WP-1500RST Service Manual online

-18-
❒ 
Voltage change(Dual voltage only)
Models equipped for dual voltage can be adjusted to operate on a power supply of either 110(or 127) or 220 volts.
However, in order to avoid the danger of fire and prevent damage to the washing machine, the voltage setting
must match the voltage of your power supply. The voltage set at the factory is indicated on the "PRESENT
VOLTAGE" column in the spec. label on the back of the washing machine.
To change the voltage setting, follow the procedure that follows:
1. Unplug the power cord from the electrical outlet, by grasping the plug itself.
2. Use a screwdriver to remove the back cover from the washing machine(Fig. a).
3. Remove the polyethylene bag covering the lead wire housings(Fig. b).
4. To change the voltage setting from 220V to 110(or 127)V, disconnect the housing marked "220V" and connect
the housing marked "110 (or 127)V" and connect the housing marked "220V"(Fig. c).
5. Cover the housings with the polyethylene bag and reattach the back cover.
6. Be sure to indicate the new voltage setting on the "PRESENT VOLTAGE" column in the spec. label for future
reference.
DRAIN SELECTOR
SPIN TIMER
WASH • RINSE
DRAIN
OFF
ON 
OFF
Drain Pump
Pumping
Pumping
Off
Pumping
Off
❒ 
Drain Pump Operation(Pump model only)
Fig. a
Fig. b
Fig. c
Others
Water leakage
Hose connection is not secured.
Bearing for pulsator shaft assembly
is worn.
Plunger valve bellows is damaged.
Plunger valve assembly is
damaged.
Bellows assembly is damaged.
Bellows connection is not secured.
Secure firmly.
Replace with a new pulsator shaft
assembly.
Replace with a new one.
Replace with a new one.
Replace with a new one.
Secure firmly.
Page of 26
Display

Click on the first or last page to see other WP-1500RST service manuals if exist.