WP-1500RST - LG Washing Machine Service Manual (repair manual). Page 13

-13-

4. Tighten the bolt of the coupling assembly while

adjusting it to the cutter split made in the spin
shaft(Fig. 43).

2. Untighten the plunger valve cover by rotating in the

direction of the arrow(Fig. 45).

Plunger valve

cover

3. Remove the plunger valve spring, the plunger valve

rod and the plunger valve bellows(Fig. 46).

To assemble the plunger valve assembly, reverse the
disassembly procedure.

Cover

Spring

Bellows

If water leakage occurs at the spin tub after
assembling the bellows assembly and the
bellows supporter, it is wrong. It could cause
an electrical shock or a fire, therefore they
should be securely assembled again.

• Damage to the plunger valve cover may

cause water leakage.

• When replacing the plunger valve assembly,

take care not to cause water leakage.

After removing the back cover and setting the knob
for the drain selector to "WASH - RINSE", proceed as
follows:

1. Disconnect the plunger valve strap from the

plunger valve rod(Fig. 44).

Fig. 43

Fig. 44

Fig. 45

Fig. 46