Read LG WP-1350QST Service Manual online
-11-
4-6. Washing Tub Assembly
replacement
After removing the panel assembly, the safety cover
assembly, the spin dryer basket assembly, the spin
dryer cover, the washing cover, the Q-spring, the
nozzle case, the door switch and the back cover,
proceed as follows:
1. Disconnect the drain hose or the drain hose-D
1. Disconnect the drain hose or the drain hose-D
(Pump model).
2. Remove the V-belt from the pulsator pulley(Fig. 29).
4-7. Gear Case Assembly
replacement
After removing the back cover and opening the
washing cover, proceed as follows:
1. Take out the pulsator cap with "-" type driver.
2. Loosen the pulsator fixing screw and pull up the
1. Take out the pulsator cap with "-" type driver.
2. Loosen the pulsator fixing screw and pull up the
pulsator(Fig. 36).
3. Remove the V-belt(Fig. 29).
4. Lay the washing machine on its front side on a
4. Lay the washing machine on its front side on a
blanket or some cardboard.
5. Unscrew and remove the screws fastening the base
and remove the base assembly(Fig. 37).
Fig. 36
Fig. 37
Fig. 33
3. Unscrew and remove the screws fasting the spin
dryer cover guide.(Fig. 33)
4. Remove the spin dryer cover guide from the tub.
(Fig. 33)
5. Unscrew the screws on both sides and pull off the
front panel.(Fig. 34)
6. Remove the screws on the front and the rare
and pul it out.(Fig. 35)
Fig. 34
Fig. 35
Click on the first or last page to see other WP-1350QST service manuals if exist.